GX35 brush cutter garden tool and equipment

Main Features

1) Simple structure in linear type ,easy in installation and maintation. 

2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts. 

Machine Parts

Name: GX35 BRUSH CUTTING 

Brand: O-JENAS

Original: China

Domestic famous engines, strong driving force, low fuel consumption, high economic benefits.

FAQ

Q: Should I wait to let my generator cool down before adding fuel?

A: Yes, it is always good for safety reasons.

FAQ

FAQ

Q:Pull the chainsaw for a long time but cant start it?

A:First,check carefully if mix the fuel according to the scale on fuel tank.if not,cant get start the machine.and
easy to broke the machine.please severely operate according to the operating manual,mix the fuel.
Secondly,if the ratio of fuel is right,please check if the way to start the machine is right,if the machine is cold,
mush open the switch.when start the machine.open the ventilation switch,then hold the start handle,pull it and
hear the noise"bang"and then put in the ventilation switch immediately,so can start the machine.if its warm
up to start the the machine,the warm up start means re-start after stop for a few minutes,don't need to
change the ventilation switch,just start it directly,if in wrong operate,will also broke the machine,water the
cylinder means cause to much oil get into the cylinder,this can cause the machine very different to start,to
solve this problem,you can have to open the air filer;get out the spark plug.and then make the machine
handstand and pull it several times.let the oil in cylinder out of the cylinder,restart the machine,start it according
to the rig ht way.