0-10000Nm dynamic torque sensor

0-10000Nm dynamic torque sensor 

Introduction

1, motor, rotating power equipment such as engines, internal combustion engine output torque and power of detection; 

2, fan, water pump, gear box, torque wrench, torque and power of detection;

3, railway locomotive, automobile, tractor, airplane, ship, mining machinery, the torque and power of inspection measurement; 

4, can be used in the wastewater treatment system in torque and power of detection;

5, can be used in the manufacture of viscometer; 

6, can be used in the process industry and process industry.

detailed picture

Technical parameter

The amount of process range: 5 - 3000000 N m (small range can refer to the CKY-805 trace range torque series)

The amount of constant rotating speed: the highest 12000 rpm. (more high speed please inform)

Torsional moment of precision: < 0.5 or 0.3 or 0.1% F - S (optional)

Frequency response: rate 100 s

Non line: < + 0.08% F S

Heavy complex: < + 0.06% F S

Later lag: < 0.05% F - S

Zero point drift: < 0.2% F - S

Long period of stability: < + 0.3% F S

Lose out resistance: 1000 Omega + 5 Omega

The vast edge resistance: >500M.

Static state overload: 120% 150% 200% (optional)

The with temperature: - 20 ~ 50 degrees

Storage: storage temperature - 45 ~ 70 degrees

Power source: piezoelectric 24VDC or + 15VDC,

The total current consumption: < 130mA

The letter number output: 4-20mA, 1-5V, 5KHZ - 15KHZ (frequency) or customer specified

Rated torque : 10KHZ ± 5kHZ ( positive and negative bidirectional measurements )
Signal duty cycle : (50 ± 10)%
Speed Pulse: 60 pulses / revolution or 120 pulses / revolution
Protection degree : IP65

Dynamic torque sensor

 The static torque sensor