PC Laptop thermometers,Indoor & Outdoor

Specifications

TEMPer8_T4 is a temperature acquisition device connecting with the computer via USB. After connecting up to Four external probes, cooperating with the computer software or computer TXT documents, it can read the ambient temperature data and records it into the computer. (the master device can be connected with Dx, Tx, Hx probes at the same time !)

TEMPer8_T4 can be used in computer room, weather, chemical reagent and special environment temperature data acquisition.

2. Function & Feature

· Range of temperature: TEMPer8_T4 : -40℃~+125℃;

· Precision of temperature : + 1℃ (at 0~+100℃ );

+ 2C (at other range )

· Resolution rate of temperature: 0.0625℃

· Electricity:< 5mA;

· Support Windows NT,XP, VIST;Win7,Win8

· Memory requirement: 20M

· Data auto save to be txt Or csv form, can be open by excel;

· Send mails function

· Graph transfer function

New Function

(1)TXT Special button:

As long as you long pressing the TXT button for 1 seconds, you can read the temperature no matter in excel, text or word form without running software. If to stop the reading, press the TXT button again. Easy operation! Solve your installed software and cross-platform used troubles!

(2)Caps lock and Num Lock:

You don’t want to install software, OK! You can use the Caps lock and Num lock function.

As long as you long press the caps lock or Num lock for 3 seconds, you can read the temperature no matter in excel, text or word form without running software. Then you can create curve. (Note: when you use this function, please don't do other action. otherwise, your computer will appear abnormal phenomena. )

3. Installing instruction

Software installing instruction: please go to to download the process

a) Uninstall the USB driver

b) Install dotnetfx.exe, if your computer system is Vista, may be you don’t need to install this process. Dotnetfx.exe is framework 3.5 of Microsoft, you can download it from the website of Microsoft;

c) Decompress TEMPer8 V1.0.rar to your computer, and running TEMPer8 V1.0 setup.exe.

Hardware installing:

Plug the thermometer into the USB port of the computer to connect it and running the TEMPer8 V1.0.exe.

4. Operating instruction (Note: Our software only support windows system .)

Run TEMPer8 V1.0 exe, view the real-time data. Before use, please connect the probe to the computer and then run the software. If you want to change different probes during the measurement, please restart the software. Software interface as shown in the figure below.

Picture 4 MSN

4) Skype FUNCTION

Picture 5 Skype

5) THE SETTING

In functional Settings page, you can set the data storage, alarm temperature, temperature calibration value and temperature unit, language, data path, read interval, alarm value, etc

5. Packing specification