Full Automatic galvanized/PVC coated chain link fence Machine

Full-automatic chain link fence machine

1.Automatic Chain link machine for manufacturing chain link fences of different sizes. The wire is taken in from the payoff stand and passed through the dies where the DIAMOND SIZE takes place. Different gap sizes. After passing from the die the diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually glided down to enable the next stitch to take place.
2.The automatic chain link machine is automatically wound to form rolls when the desired length is manufactured.
3.One side or both sides of the end of net hole is twisted or with burr in edge.
4.Use compacting machine to make it into rolls.

Main Features

1)The machine is controlled by PLC automatic controller, so only one person is needed to operate it.
2) edge of fence can be twisted or foled or one side twisted one side foled at same time
3) double wire freeding, speed of main draft can up to 400 rorates
4) most famous HUICHUAN brand servo motor, highest quality made in China
5) Most eletrics are schneider brand
6) the fence will be rolled automaticly
7) there is wire straighteners on the machine that the wire will be straightened automaticly

Machine Part 1

Name: Net Reel Machine

Brand: HTK

Original: China 

Suitable wire to the machine:
High-quality low carbon steel wire, Galvanized steel wire,Stainless steel wire, Aluminum alloy wire, Aluminum-clad steel wire.

Main Part 2

Name:Draw In Machine
Brand: HTK 
Original: China
Edge of fence can be twisted or fold or one side twisted one side fold at same time

Machine Part 3

Name: Wire-coiling Machine
Brand: HTK 
Original: China
Machine adopts 2 feeding wire methods to weave the mesh, high weaving speed with high quality.

Main Part 4

Name: Controller
Brand: HTK
Original:China

This machine adopts PLC (programmable logic controller). Controlling the wire feeding, chain making and chain link fence weaving.