COP7.55 auto bypass and EC motor new design air conditioner

Plywood case

Specifications

Main features of  COP7.55 auto bypass  and EC motor Commercial air conditioner  : 

1. Heating capacity of heat pump system 2480 W

2. Cooling capacity of heat pump system 2350 W

3. Power supply 220-240/1/50 V/Ph/Hz

4. External static pressure 130Pa

5. Three speed EC motor fan

6. Auto defrosting and bypass central controller

7. The airflow is controlled according to the ambient temperature.

Technicalparameters

Configeuration

1. Crossflow heat exchanger                2. Supply fan                   3. Exhaust fan                           4. Fresh air filters

5. Return air filter                                     6. Bypass system         7. Compressors                        8. Evaporator 

9. Condenser                                          10. Connection box       11. Electrical heater                  12. Drain tray

13. Drain pump                                       14. Fresh air vent          15. Exhaust air vent                  16. Return air vent

17. Supply air vent                                  18. Access door             19. Cabinet

Dimensions Technicalparameters

Dimensions Controller description

1. The airflow is controlled according to the ambient temperature.

2. Compressor and bypass control

3. The central controller can manage, monitor and control the whole system.
4. Functions of central controller
(1 Timely display of operation data
(2) Timely display of operation status of individual part
(3) Specific check to any data of ay unit
(4) Airflow adjustment according to ambient temperature
(5) Auto defrosting
(6) Auto bypass
(7) Heat pump
(8) Auto restart
(9) Filter monitor
G4: 3 months cleaning reminder
F7: 6 months cleaning reminder
H10: 12 months cleaning reminder
(10) Auto water drain
(11) Alarm
A. Fault alarm of refrigerantion system, high pressure or low pressure alarm
B. Communication failure alarm
C. Frosting alarm
D. Short connection or wrong connect of the sensors
E. Sensors lack or faults alarm
F. Over heating of electrical heater
G. Time resetting after euqipment faults
H. Fire alarm (if return air temperature higher than 45°C.