golden supplier TD-type bucket elevator manual

 The hoist suitable for conveying powder, granular and small block of non-abrasive, and abrasive materials, such as: coal, cement, stones, sand, clay, ore. As the traction hoist body is ring belt, it does not allow transmission at high temperature (no more than 70 °) of the material

1, elevator use and features:

My company produced TD-type bucket elevator, and HL-type compared with a transport volume, enhance the height of high and stable and reliable operation, long life and other significant advantages.

TD-type bucket elevator is a kind of centrifugal belt bucket elevator, which is run in part (hopper and indexing belt), the upper section of the drive pulley, tensioner pulley of the lower section of the intermediate casing, drives, reverse only brake so on. Discontinuous arrangement of the aircraft hopper, the hopper using "dig emulated" to load the use of "centrifugal cast materials the Law" to uninstall, traction body is ring belt with the use of friction between the upper pulley to drive, so no dry run smooth sound It is a lighter type of fast elevator equipment.

The hoist suitable for conveying powder, granular and small block of non-abrasive, and abrasive materials, such as: coal, cement, stones, sand, clay, ore. As the traction hoist body is ring belt, it does not allow transmission at high temperature (no more than 70 °) of the material.

Assembled belt use by the round body, flange connection formed with the bolt. In the pulley wear and tear to a certain extent, may, under screw bolts, replace them wheel rims, replacement convenient, and save materials, reduce maintenance costs. The lower lever tensioning device, the installation operation after 2 hours can be no loose screw on a tight belt, use a period after the belt will naturally sag, tighten the screw again, thus ensuring the normal operation of the machine.

TD-type hoist gear in two forms, respectively, with ZJ-type speed reducer, ZJ-type speed reducer shaft directly set in the spindle shaft head, eliminating the transmission platform, coupling and so on to make a compact, light weight, the reducer, low noise, smooth operation, and with the floating spindle can be installed to eliminate stress

Production summarize

Our company produces the TD type dou type hoist conveying principle is: hopper put materials.The lay aside from below, with out Veda since in the ascent to the top or chain conveyor belt, bypassing.The crown chakra downward flip, dou type after the material hoist forward into accepting slot. Ascension.Machine designed for vertical transportation powder, granular, and small block of grinding suck less sex.Disperses the shape material, such as food, coal, cement, crushed ore, etc, hoisting height is highest 40m, its features: simple structure, smooth operation, to dig type pack material, away.Heart gravity type unloading, no more than 60 material surface temperature. TD JB3926-85 type according to"Vertical dou type hoist" standard design and manufacturing, and traditional type D bucket machine phase Ratio, high transmission efficiency, hopper, preferred choice. Form.

2, Technical specifications: 

Product specifications in order to express their wide-Doo technical specifications in Table 1     

 Table 1