Waterproof and Rechargeable Electronic Dog Fence With Adjustable Collar

Electronic Pet Fencing System 023B

This hidden VS-023B fencing system is among the most reliable, cost-efficient pet containment systems available today. A buried wire transmits a harmless radio signal. When you dog approacheds the boundary, the signal causes the dog's collar receiver to deliever a warning beep first. If your dog continues closer to the boundry your have set up. Your dog will naturally seek to avoid correction, and is content staying within establised boundaries.

Main Features

1) Pulsed Proportional Stimulus - The closer your dog gets to the boundry, the more intense the shock will be.

2) Progressive Tone Stimulus - A warning tone will be issued first, then a shock stimulus after 4-10 seconds. If your dog continues to move closer to the boundry the shock stimulus will progressive

3) Variable Field Width Control - Allows you to precisely control the width of the signal field.

4) Audible and Visual Wire Break Indicators - Should your buried wire ever break, a loud sonic alarm will sound accompained by a flashing light.

5) Speed Detect Anti-Run through - The faster your dog is moving, the quicker the higher level of intensity is issued.

6) Built-in Lighting Protection - Protects transmitter from power surges caused by lightning strikes.

7) Multiple Collar Operation - Add as collars as you like to contain as many animals you have. There is no limit to the number of collars it can control.

9) Up to 5000 square metre range (over 1.2 Acre)

Package Contents

1*Indoor wall-mounted transmitter

1*Power plug
1*Adjustable receiver collar
1*boundary wire of 300 M
2*Extra metal contact points
20* Training flags
1*Test bulb
4*screws
1*Manual

Instractions for setting up your containment System

Step 1: Prepare a layout of your containment area

Step 2: Add proposed wire location to your drawing
Step 3: Estimate the amount of wire needed
Step 4: Install the wall transmitter
Step 5: Lay out the perimeter wire

Step 6: Connect the perimeter wire to the wall transmitter

Step 7: Verify transmitter is functioning properly 
Step 8: Install the collar
Step 9: Test the containment system

Step 10: Adjust the signal field width

Step 11: Install the boundary wire

Step 12: Install the boundry training flags

Step 13: Fitting the collar to your dog

How the correction works

1. Pre-correction warning tone: When the dog reaches the edge of the singal field in the yard, it will hear a warning tone that lasts about 4~10 seconds. If the dog does not return to the safe part of the yard, it will receive a continuous correction and slight shock until it returns to the safe area.
2. Run-through Prevention: The receiver automatically increases the correction as the dog enters the signal field. The dog cannot "run through" the signal field without receiving a strong correction.