350W HVLP FLOOR BASED SPRAY GUN

Specifications

Product  Description :

1.General Characteristics  
This gun can be mainly used for spray-painting car.furniture.instrusment.equipment and   
for decoration of hotel.house dansion etc.  
2. Operation method  
a.  Connect the air hose with gun and motor before use.  
b.  Adjusting air volume turning the air adjusting valve clockwise will reduce the air   
volume and counter-clockwise will increase air volume.  
c. Connect the motor with power supply ,turn on the power and the indicator light on. 
the motor start working to blow the air current is blowed down form the vent.turn off   
the power and the indicator light off,the motor stop working and no air current out put.  

TECHNIQUE PARAMTER  
Air pressure :0.1-0.3 bar  
Max fluid delinery:200cc/min

Measure:47x30x32cm 2pcs  8/6kgs       60x47x32cm  4pcs   15/12 kgs

packaging and shipping :

usually one pieces a packaging ,100 pieces for  a carton ,for especially packaging ,we can also offer .

our services :

A:Use Clean air filter through air dryer and air filter.

If not,dirty air can cause painting failure .

B:When you use ths gun for the first time after purchasing,adjust fluid needle packing set.

Slowly tighten fluid packing seat and loosen a bit when fluid needle set does not return smoothly,and adjust so that fluid needle set smooth moves.

C:If you use this gun for the first time after purchiang,clean fluid passages spraying thinner and remove rust preventive oil.

If not ,remaining preventive oil can cause painting failure such as fish eyes.

D:Firmly fix hose or container to spray gun

If not ,disconnection of hose and drop of container can cause bodily injury.

company information :

COMPANY : Zhejiang Sanye Machinery Co.,Ltd

TEL :             0086-575-87633579    Fax:0086-575-87606825

ADD:           Jinjiazhan ,Ruanshi town,Zhuji City,Zhejiang Province