Industrial Hydraulic Filters BRF TWO-WAY REVERSIBLE FILTER SERIES

Specifications

Product  Introduction                                                                          

BRF series filters can be installed on flow-frequent-switching components, so as to solve

the problem that the oil only can flow one way direction as well as filtering; so that system

piping is simplified and the space is saved. The series filter adopts glass fiber filter

material, with high filtration rating, big flow rate capacity, low original pressure loss, large

contamination retention capacity etc. advantages; and equipped with pressure difference

indicator, when the element is clogged to oil inlet/outlet and pressure difference reaches

setting value of the indicator, the signal is sent out, the filter element should be cleaned

or replaced.

Product  Characteristics                                                                      

Filter basic  construction
BRF series filter is composed of filter top cover and spin-on housing.
2.1  Housing material
Top cover material: Ductile cast iron
Filter bowl material: Carbon steel

2.2  Seals
Perbunan (= NBR) (-30~+120°C)Viton (= FPM) (-20~+200°C)

2.3 Filter element
Filter medium material(refer to P142)
High strength carbon steel skeleton

2.4 Optional accessories
Electric clogging indicator:CS-V

2.5Type of connection (chosen as per filter models)
Flanged connection

2.6 Symbols   

Type selectoin and technical data                                                                                  

3.1 Order example

3.2 Technical data

Mounting Size                                                                                                                        

5 Product characteristic curves 

5.1 Housing pressure drop /flow rate characteristic curves
Housing pressure drop /flow rate characteristic curves are according to ISO3968, and suitable for the mineral oil with density 0.86 kg/dm3 and kinematic viscosity 30mm2/s.

5.2 Differential pressure / flow characteristic curves of filter element
The characteristic curves of filter element are suitable for the mineral oil with kinematic viscosity 30 mm2/s. Differential pressure and viscosity is proportional.

                                                                                                                                                                                                                                                                                    Note:If any other requirements,please consult us.