FU Sintered Iron Metal Powder Bush

Specifications

   FU Sintered Iron Metal Powder Bush

The base material for sintered parts such as sliding bearings or other formed parts are iron, bronze, iron with bronze and other metal in powder form. This powder is formed under high pressure in dies into a temperature, which is just below the melting point. According to the work condition, the bearings can impregnate with different oil or solid lubricants for the self-lubricating. Sintered self-lubricating bearings are the ideal and economical solution for applications where lubrication is difficult or lubrication could not be applied.

FU sintered bronze bushing powder is mold pressed under high pressure and then sintered under high temperature, and oil is soaked into the homogeneously spreaded tiny pores of the metal under vacuum. Fu bearing can withstand dry condition in medium speed and low load for sometime. Moreover it is cheap and stable in dimension. This is widely used in domestic electric and electronic machines, electric tools, textile machines, chemical engineering machines, automobiles and official business machines.

Features

• 1. Good wear resistance with lower friction
• 2. Lower maintenance requirement
• 3. Lower the material cost for large production
• 4. High speed with lower noise
• 5. Can be machined again after installation if possible
• 6. Different structures could be available against special request

Tolerance 

• Inside diameter ID: F7
• Outside Diameter OD: r7
• Flange Diameter: js13
• Flange thickness: js13
• Length: js13

Specifications :
Load capacity:35 N/mm²
Temperature Limt:-80~+160 °C
Speed limit:2.5 m/s
PV Limit :2.45 N/mm² .m/s

 Production flow

Types of FR bearing

• Factory informtion

Admin Office

workshops

Inspection

• We are supplying full lines of slide bushings:

• ISO/TS16949 certification

• Contact information