Non magnetic Radial 6000 Plastic ball bearing with glass ball

Non magnetic Plastic ball bearing

Features of Plastic Ball Bearings:

The good reason to use Plastic Ball bearings:

1.Corrosion Resistance:

Most bearing failures today are caused by corrosion. YWS bearings' plastic ball bearings can be utilized in environments destructive to conventional bearings. They can operate in hostile environments such as sea water, film processing solutions and swimming pools. In many cases the medium can be used as a lubricant.

3.NON METALLIC NON MAGNETIC:

Plastic ball bearings become completely non magnetic when fitted with either polymer, glass, or non magnetic 316 stainless balls. They are ideal for use where there can be no magnetic distortion.

4.  HYGIENIC:

Plastic ball bearings are naturally clean because they do not corrode or require lubrication. They are ideal for wash down applications and clean room environments.

5.NOISE CONTROL:

Plastics have the inherent ability to dampen vibrations. Add lubrication and they become virtually silent.

6.SHOCK LOAD SUPPRESSION:

Plastics absorb shock loads better than metal due to their elastic nature. Many conventional radial ball bearings fail due to brinelling of the raceway, ie: balls denting the raceway.

7.LUBRICATION FREE:

There are three reasons steel bearings require lubrication; to reduce friction, dissipate heat and resist corrosion. Plastic, by nature, does not corrode. Due to the design of plastic ball bearings, there is no metal to metal contact, resulting in less friction; therefore dissipating heat becomes less critical.

8.LOW INERTIA FREER TURNING:

Plastic ball bearings run freer and naturally have low inertia due to the low coefficient of friction between plastic and stainless. Two other factors contributing to low inertia are the ability to run without grease and being lighter in weight.

9.Specification of 6000 series plastic deep groove ball bearing

 10. Production process:

Packing Details: