high quality steel forging parts/ Customized Precision casting / Forged/cold forging/drop forging

JRS Farm parts is capable to supply a wide-range of agro based products like agricultural implements,casting forging, farm parts, cold forging parts, tractor linkage, casting and forging & towing parts. As a part of its commitment to this sector, JRS Farm parts has a farm-parts manufacturing plant in Ludhiana, which is part of the vast production capabilities of the group.

JRS has state of the art manufacturing infrastructure that comprises:

• Vertical Milling machines

• Small productive Automatic Lathes

• Tapping Lathes

• Mechanical Power presses 150 Tons (H type & C type)

• Hydraulic presses of 100 & 250 tons

• Drilling machine Hydraulic & Gear Drilling

• Centre less Grinders

• Automatic Band saw machines

• MIG welding

PRODUCTS MANUFACTURED BY JRS FARM PARTS:

1. Tractor parts

2. Agriculture parts

3. Bucket tooth

4. Cross holders

5. Flanges

6. Trilateral trailers

7. Universal joint cross

8. Clutch yokes

9. Sockets

10. Yokes

11. Crank shafts

12. Earth moving machinery

13. Tie rod ends

14. HT & LT transmission hardware’s

15. Pole line hardware

16. Miscellaneous.

1.   POLE LINE HARDWARE:

We are a leading Manufacturer & Exporter of  transmission, distribution and Pole Line Hardware Accessories such as Forging Components,  H.Connector, Tension Hardware, Insulator Pin, Suspension Hardware. It also manufactures cold forging parts & casting and forging.

POLE LINE HARDWARE

 2.   MISCELLANEOUS:

When iron is heated it expands, and upon being cooled it contracts to about its original size. This property is utilized in doing what is known as shrinking. Shows a collar shrunk on a shaft. The collar and shaft are made separate, the hole through the collar being slightly less in diameter than the outside diameter of the shaft. The collar is then heated red hot and the heat causes the collar to expand, making the hole larger in diameter than the shaft The collar, while still hot, is then placed on the shaft in proper position, and cooled as quickly as possible by pouring water on it. As the collar is cooled it contracts and squeezes, or locks, itself firmly in position. This principle of shrinking is used to a large extent where a firm, tight fit is wanted, the only objection being that it is rather difficult to take a piece off after it has once been shrunk into place. It also manufactured casting forging.

MISCELLANEOUS

PACKAGINGS OF Casted and Forged Parts:

FINISHING OF FORGING PARTS:

 1. Automatic Zinc Plating Plant:- Our own plant for zinc plating has high level automation. We receive enhanced solution by thorough maintenance and ensuring quality by carrying on the metal finishing work to hold components that are commonly in Racks or Barrel through Automatic plants. Our professionals adhere to the rules and regulations laid by the regulatory body to ensure best material quality. The automotive parts or any other hardware parts or tractor linkages can be coated in this plant using the electroplating system automatically according to the steps. This current technique of using alkaline zinc coating has numerous benefits in comparison to the traditional method. With this, Automatic Zinc Plating Plant much amount of required time, vitality and a measure of Zinc to get the adequate self-protective coating can be set aside.

CONTAINER STUFFING OF FORGING PARTS:

Fumigation: -Our staffs ensure the stuffed containers are not damaged by the attack of pests and insects. So a complete and thorough fumigation or a pest control process is followed. Along with the original documents of the containers, the fumigation certificate is attached in order to make it easier for the customers during the custom clearance. The fumigation is important to keep away any kind of disease or insects enter the country while instant cleaning of the containers.

COMPANY ANNUAL TURNOVER

DELIVERY TIME

CUSTOMERS FROM DIFFERENT COUNTRIES

 FORGING PIC: