Free Sample! 904 Stainless Steel PIPE Manufacturer From China

Specifications

Free sample! 904 stainless steel sheet manufacturer,China

STAINLESS STEEL CONSERVATION

1. Clean frequently with a cleaner and water. Any cleaner that is safe for glass is usually safe for stainless steel.

2. Scrub off all rust from these objects with a scrubbing pad or steel wood pad. This means getting rid of rust from pots and pans before putting them into a stainless steel sink or on top of a stainless steel stove. 3. Put a rubber mat at the bottom of the stainless steel sink before placing rusted pots and pans (such as cast iron cookware) in the sink. 4. Apply a thin layer of lubricant (such as mineral oil) to the surface of the stainless steel. This prevents rust from forming.

904 stainless steel sheet

Instruction:

 904 stainless steel is a versatile stainless steel material, anti-rust performance stronger than

 the 200 series stainless steel. High temperature also relatively good, the general temperature

 limit is less than 650 °C. 304 stainless steel with excellent corrosion resistance and good

resistance to intergranular corrosion. On the oxidizing acid, in the experiment: the concentration

of ≤ 65% of the boiling temperature of nitric acid, 304 stainless steel is highly resistant to corrosion.

Alkali solution and organic acids and inorganic acids also have good corrosion resistance.

Hot rolled steel plates are appropriate for construction works, oil & rig industry, pipe Industry, machinery industry, ship building Industry and other downstream industries. Moreover we also provide sales executives and engineer team for giving the products information to the customers.

Machinability

Stainless steel 904 has good machinability. Machining can be enhanced by using the following rules:

• Cutting edges must be kept sharp. Dull edges cause excess work hardening.
• Cuts should be light but deep enough to prevent work hardening by riding on the surface of the material.
• Chip breakers should be employed to assist in ensuring swarf remains clear of the work
• Low thermal conductivity of austenitic alloys results in heat concentrating at the cutting edges. This means coolants and lubricants are necessary and must be used in large quantities.

3.   Product display :

Company profile