2017 New LED floodlight Factory direct price IP68 waterproof 3w 5w 9w led rgb dmx plant spotlight outdoor led light

 All of product picture will take by our factory seriver, so pls don't worry about the picture that is different from our our goods that we send

For Separated bulb induction lamp, it is very easy to install like CFL with E27/E40 base. You can light them in any direct in your home, shop, school, ECT.

For round and rectangular shape, when you wired them together with your fixture, please notice as following:

1. Please confirm good connection between tube and ballast firstly, and then make the L side and N side of ballast connect with power. So, it can avoid load open to be charged.

2. The watt of tube and ballast must be consistent. Do not make mistake.

3. Green and yellow line is the groinding line, it must be connected with ground and lamp shade.

4. For the fixture reflector, you?d better to use mirror material and must have some spare room for tube, tube and the side of reflector need 70~90mm distance, at least40mm from bottom of reflector.

5. For all kinds of different fixtures matched with induction lamp, you must pay attention the heat dispersion. The better heat dispersion, the longer lifespan for induction lamp. The temperature inside the ballast house tried to keep before 50 cent degree. The farther between ballast and heat source, the better.

6. Solar system, 12VDC or 24VDC, take care that control system should have certain function of anti-interference.

7. For dimming function induction lamp, it will be the same installation way if you choose automatic model; if you chosed hand control model, we will give you special instruction paper .Do not worry. Easy to follow 

 All of our products were sent out before 100% testing by our professional technical staffs and 100% qualification, it is rare to have the lamp problem. Do not worry, you can go ahead for the purchase.We can warranty 3~5 years for your products.

Houses,office,exhibitions,meeting rooms,hotels,restaurants,schools,factories,hospitals,workshop,storages,roads,streets...etc

Caution:
1.LED Tube and its all fittings cannot withstand any mechanical pressure.
2.Any question about the installation of our LED Tubes,please ask for professional guide.
3.If the aluminum pipe is damaged or deformed,please stop using the LED Tube to avoid dangers.
4.Before installation,please switch off the electricity and ensure to install our led tube normally.
5.please install or place the LED tubes to avoid sunlight and high temperature.
6.It is only used indoors.