Original factory Titanium ball bearing 6320-2Z

Specifications

Original factory Titanium ball bearing 6320-2Z

Specifications of titanium ball bearing 6320-2z

1 abstract of titanium ball bearing
Deep groove ball bearing is most common in rolling bearing a type. The basic type of deep groove ball bearings by a case and a inner circle, a group of steel ball and a group of keep frame composition. Deep groove ball bearing types have single and double row two separate, deep groove ball bearing type code for 6, double row deep groove ball bearing code for four. Its simple structure, easy to use, is the most common production, the most widely used kind of bearing.

2  features of titanium ball bearing
Deep groove ball bearing is the most representative of rolling bearing, used widely. Suitable for high speed of operation, high speed even and very durable, need not often maintenance. These bearings are small friction coefficient, extreme high speed, simple structure, low cost, easy to manufacture high manufacturing precision.

Application: automotive components, electric motors, machinery, bicycle

1)      High accuracy

2)      Competitive price

3)      OEM service

4)      Free sample for first check

5)      Low noise

6)      Prompt Delivery

Deep groove ball bearings mainly take radial as well as take moderate axial load. They are with less coefficient of friction, high limiting speed, large size range and variations of structure.

A ball bearing is a type of rolling-element bearing which uses balls to maintain the separation between the moving parts of the bearing.

ball bearing is a type of rolling-element bearing which uses balls to maintain the separation between the moving parts of the bearing.

Ball bearings tend to have lower load capacity for their size than other kinds of rolling-element bearings due to the smaller contact area between the balls and races. However, they can tolerate some misalignment of the inner and outer races.

Compared to other rolling-element bearings, the ball bearing is the least expensive, primarily because of the low cost of producing the balls used in the bearing 

 Hot Model: