Japanese stockings NSK cylindrical roller bearing SL192310

Specifications

Japanese stockings NSK cylindrical roller bearing SL192310

Introduction of Japanese stockings bearing SL192310

Since the rollers of cylindrical roller bearings make line contact with the raceways, these bearings can sopport heavey radial loads and are suitable for high speed operation. Cylindrical roller bearings come in various configurations as shown in the dimensional table.The rollers are guided by collars of either the inner or outer ring.

Since cylindrical roller bearings are seperable, they can easily be mounted or dismounted in cases when interference fits are required.

This cylindrical roller bearing with a polyamide/nylon cage and removable inner ring is suitable for applications that support high radial loads. This roller bearing is measured in metric units for industry cross-matching and parts consistency. This is a single row roller bearing that supports high radial loads with low friction. A removable inner ring in the open bearing allows application of lubrication. The polyamide/nylon cage prevents the rollers from coming into contact with each other during use to reduce friction, vibration, and noise and weighs less and is quieter than cages made of brass.

Cylindrical roller bearings are used in applications where high radial loads are present such as in conveyer belts, traction motors, railway car axle boxes, and oilfield mud pumps, among others.

Roller or rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. They are usually composed of two rings, rolling bodies (such as bearings or cylinders), and a cage to house the parts. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. Rolling bearings can be open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

This type of bearings is separable. As their rollers linearly come into contact with inner ring and outer ring with less coefficient of friction, these bearings have very good capacity of radial load, suitable for electric motors, automobiles, transmission shafts, gear shafts and so on.

1. Cylindrical roller bearings feature high radial load because the rollers and raceway are in linear contact 

2. The NU and N types exhibit their best performance when used as free side bearings since they adjust to the shaft axial movement, to a certain extent, relative to the housing position

3. The NJ and NF types carry a certain degree of axial displacement in both directions so they are also used as free side bearings

4. Models available: NU, NG, NUP, N, NF, NH, NNU, NIV

5. Moreover, we can manufacture these bearings according to customer's drawings and samples.

cylindrical roller bearings with cage are units comprising solid inner and outer rings together with cylindrical roller and cage assemblies. The outer rings have rigid ribs on both sides or no ribs, the inner rings have one or two rigid ribs or are designed without ribs. The cage prevents the cylindrical rollers from coming into contact with each other during rolling.

The cage type bearings are very rigid, can support high radial loads and, due to the cage, are suitable for higher speeds than the full complement designs. Bearings with the suffix E have a higher capacity roller set and are thus designed for very high load carrying capacity.

Single row cylindrical roller bearings as for the ring ribs divided into N-type,NU type,NJ and NUP type and so on.Cylindrical roller bearings withstand heavily capacity of the radial load.But according to the structure of ring ribs can also be under some one-way or two-way axial load.

NN and NNU type double row cylindrical roller bearings are compact structure,which with strong rigidity and bears load capacity.Even if it has bear heavily load ,its deformation is small.It mostly used for machine tool spindle bearing.

FC,FCD,FDCP-type four-row cylindrical roller bearings can bear greater radial load,mostly using for rolling mill and other heavy machinery.

  In bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds.

The outer and inner rings of all types are separable.

Some cylindrical roller bearings have no ribs on either the inner or outer ring, so the rings can move axially relative to each other. These can be used as free-end bearings. Cylindrical roller bearings, in which either the inner or outer rings has two ribs and the other ring has one, are capable of taking some axial load in one direction Double-row cylindrical roller bearings have high radial rigidity and are used primarily for precision machine tools.

Specification of Japanese stockings bearing SL192310

Features of Japanese stockings bearing SL192310