10 -20 per hour Jaw Crusher for mining industry

 10 -20 per hour Jaw Crusher for mining industry

jaw crusher, whose reduction ratio up to 4-6 and the finished products are even, can be widely used in breaking hard, medium-hard, soft ore, such as various kinds of ore, the solvent, slag, building stones, marble,etc. compression strength does not exceed 320Pa.

This machine is suitable for mines,building materials,highway,railway,water conservancy and chemical industry,etc.

Advantages of    10 -20 per hour Jaw Crusher for mining industry

1. Heightened movable jaw assembly causes it to be more long-lasting. Movable jaw assembly

adopts a high-quality steel casting, and moves through two large cast steel flywheel drive.

Additionally, heavy eccentric shaft has also adopted forging billet for processing. All

those increase the risk for PE jaw crushers with exceptional reliability.

2.Integrated Cast Steel Structure Adopted in Axle Bearing housing. Integrated cast steel

structured axle bearing housing can guarantee being perfectly cooperating with the crushing

frame.

3.Quicker and convenient adjustment on the discharging opening. Main structure adopted

within the crushing cavity helps make the actual feed mouth width add up to the set width

of the feeding opening.

Working principle of    10 -20 per hour Jaw Crusher for mining industry  

The motor transmits power through belt, drives the moving jaw to do periodic motion towards

the fixed jaw by the eccentric shaft. The angle between toggle plate and moving jaw plate

increases when moving jaw moves. So the moving jaw moves towards the fixed jaw. The stuff

will be crushed in this process. The angle between toggle plate and moving jaw decreases

when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and

spring, the final crushed stuff will be discharged from the outlet.

Main Specifications of    10 -20 per hour Jaw Crusher for mining industry