Flyash aac line on sale 20,000-300,000CBM

Specifications

20,000-300,000CBM Flyash aac line

1. Advantages of 20,000-300,000CBM Flyash aac line

1.1, Lightweight:The aerated concrete dry bulk density generally is 400-800kg/m3, equivalently 

to clay brick 1/3, normal concrete 1/5, lower than normal light-weight aggregate concrete and hollow brick, hollow clay brick. so, using aerated concrete as wall material can lighten the building self weight, and then reduce the size of building foundation, girder and pillar etc. Structure, save building material and project cost, improve the building shock resistance.

Several common building material volume density (kg/m³)

    1.2, Fireproof: Most of the major raw materials is inorganic materials, so it has good fire resistance, and do not emit harmful gases when meet fire. Fire 650 degrees, as a refractory material, the thick up of 90mm walls can reach to 245 minutes fire resistance, 300mm thick up wall can reach to 520 minutes fire resistance.

   1. 3,Sound insulation: Due to a unique porous structure, so it has a sound absorption capacity. The sound absorption capacity can reach of 10mm thick wall up to 41 db.

    1.4, Insulation: As the material inside has a large numbers of the pores and porous, which has a good thermal insulation properties. The Thermal conductivity is 0.11-0.16W/MK, as 1/4-1/5 of brick. Typically, the insulation effect of 20cm thick aerated concrete wall is equivalent to 49cm thick solid brick walls ordinary.

   1.5, Permeability: Result of material by the composition of many independent small pores, the moisture absorption is slow, in the volume of absorbent is 5 times of clay saturation do. When used in the bathroom, the wall can be treated to interface directly paste tiles.

2. Performance of 20,000-300,000CBM Flyash aac line

   Finished AAC block is Suitable for all nonbearing wall and bearing wall of multi-story (less than six-floor), nonbearing wall internal parting wall, thermal insulation rooms front panel, floorslab.

3. Normal size of 20,000-300,000CBM Flyash aac line

4. Main Raw maerial of 20,000-300,000CBM Flyash aac line

5. Main equipments in 20,000-300,000CBM Flyash aac line

5.1, Material-milling Equipments:

       a. Crusher: Lime, gypsum, and such kind of bulk material need to be crushed as the first step in AAC Plant.   

       b. Ball mill: The AAC material must be fully grinded in order to make better reaction. Ball Mill is used widely, it has two types: dry and wet, can be chosen upon requirement.

    5.2, Material Metering Equipments: Computer Control Automatic Metering System is commonly used as measurement of raw materials.

    5.3, Material mixing and casting equipments: Mixer, it’s the slurry mixing machine, also is slurry casting machine.

    5.4, Cutting Machine: the AAC blank is formed after casting and precuring, as the size is too large, it must be cut to achieve the required product size.

    5.5, Autoclave: Autoclave is a device for silicate hydration products to get physical and mechanical properties.

   5. 6, Boiler: the boiler supports for the autoclave and preheat furnace and other facilities with heat.

1.Delivery time: 15 days after receipt of your deposit.

2.Payment terms: 30% T/T in advance, the left is paid (by T/T) before delivery.

3.Package:

1).Wire cables are used for fastening the machine on the trailer or inside the container. 

2).Cork wood are placed in front or behind the machine to protect it. 

3).Plastic film is covered on the machine as a rain-roof. 

4).Crane is used during the whole

1.Pre-sale service: our company can provide technological guidance and formulate suitable equipment matching program according with your specific production requirements.

2.On-purchase service: our company can solve professional technical problems and other related issues for you.

3.After-sales service: our company provides that engineers available to service machinery overseas and equipment for life maintenance.

Flyash aac line

 Why chose Henan Teng Fei?

1.Teng Fei give priority to with construction company, during years of construction equipment, progress in practice and has strong practicability.

2.Our company has years of experience in project negotiation and can provide customers with effective business negotiations guidance to win project

3.in addition to providing equipment and technical training, we also provide free foam concrete project system solutions to help you get maximum benefit.

How long is the warranty?

The warranty period is 12 months.

What services does it provide?

1.pre-sale service: our company can provide technological guidance and formulate suitable equipment matching program according with your specific production requirements.

2.on-purchase service: our company can solve professional technical problems and other related issues for you.

3.after-sales service: our company provides that engineers available to service machinery overseas and equipment for life maintenance.

What is the Teng Fei’s basic philosophy?

Henan Teng Fei Machine Manufacturing Co., Ltd. is a collection of scientific research, development, production marketing for the integration of manufacturing enterprise; The company execute principles “development is a competition philosophy” and take “efficient, pragmatic, cooperation, innovation “as beliefs.