150,000m3 aac plant /autoclaved aerated concrete aac plant -Air roll-over craft

Specifications

150,000m3 aac plant /autoclaved aerated concrete aac plant -Air roll-over craft

2. Advantage of 150,000m3/year aac plant

1. Light-weight :

The AAC block weight usually is 500-700kg/m3. It apply to fill walls of high-rise building and the 

main wall of low-rise buildings to make the whole building self-weight than normal weight reduce 

above 40% of composite masonry structure building . And that improves much building anti-aseismic ability. 

2.Good heat preservation:

The AAC block coefficient of thermal conductivity is commonly 0.11 0.18 kcal/m 0  hour.

The heat preservation effect of 20 cm aerated concrete wall is equivalent to 49 cm thick clay brick 

wall thermal insulation effect. Obviously the heat insulation performance is significantly superior to 

24 cm brick wall. 

Thus,it greatly thin the thickness of wall body. Correspondingly it will expand the effective use of 

the building area, save construction materials thickness, improve the construction efficiency, 

reduce the engineering cost and weight of the building.

3.High strength: 

By experiment, aerated concrete block compressive strength is greater than 25 kg/cm2, equivalent 

to 125 clay brick and lime-sand brick compressive strength .

4.Nice anti-seismic performance:

The aerate concrete block is light-weight,good overall performance,small inertia force during the earthquake . 

5.High temperature resistance:

When temperature is below 600, the aerated concrete block compressive strength increased 

slightly, when the temperature is controlled in 600, its compressive strength is close to room 

temperature compressive strength, so the aerated concrete as building material fireproof performance meet national fire protection standards. 

6.Good sound insulation:

From the aerated concrete pore structure, due to the internal structure of aerated concrete, like 

bread, evenly distributed a large amount of closed pores, so it is of general building materials do 

not have sound-absorbing performance.

7.High Machinability:

Aerated concrete has good processability.It can sawed,nailed ,drilled and milled, planed ,be added 

steel for construction in the manufacturing process.It has brought great convenience and flexibility.

8.Well-adapted ability:

The raw materials can be choosed river sand, ore, fly ash and so on. It adjust measures to local 

conditions and can recycling, favorable environmental protection.

3. Cutting Machine

 

Lift: Horizontal Cutting    Right: Vertical Cutting

 

 

Name	Index	Remarks
Capacity m³/year	50,000-150,000	Annual capacity
Size of blank(m)	4.2*1.2*0.6	Net
Cutting moulds No.(mm)	5/10	Vertical Cutting/Horizontal Cutting
Cutting precision(mm)	±3±1.5±1.5	Length/Width/Height
Production cycle(Min/Mould)	5	——
Quality of host cutting machine(T)	12	Vertical Cutting/Horizontal Cutting
Power(KW)	11.4	Including hydraulic station

4. Tilting hanger

5. Main Raw maerial of 150,000m3/year aac plant

1 Cement lime fly ash style aerated block raw material proportion

2 Cement lime Sand style aerated block raw material proportion

1.Delivery time: 15 days after receipt of your deposit.

2.Payment terms: 30% T/T in advance, the left is paid (by T/T) before delivery.

3.Package:

1).Wire cables are used for fastening the machine on the trailer or inside the container.

2).Cork wood are placed in front or behind the machine to protect it.

3).Plastic film is covered on the machine as a rain-roof.

4).Crane is used during the whole loading.

1.According to your inquiry, We will reply to you in 24 hours.

2.Best After-sales: We will send the technical personnel to the site for installation, commissioning and training work.

3.WARRANTY :ONE YEAR

Warranty period, in addition to the force majeure and man-made factors, the damage caused by design, process and manufacturing equipment, the seller is responsible for sending people to offer free repair.

4. We will send the spare parts as soon as possible when necessary, equipment repair parts provided by the seller are original, authentic, quality goods

How is the quality of your products?

Our products are manufactured strictly according to national and international standard,and we take a test on every grinder before delivered out. If you want see our quality certifications and all kinds of testing report, please just ask us for it.

Guaranteed: If products’ quality don’t accord to description as we give or the promise before you place order,we promise 100% refund.

How about price?

Yes, we are factory and be able to give you lowest price below market one, and we have a policy that “ for saving time and absolutely honest business attitude, we quote as lowest as possible for any customer, and discount can be given according to quantity”, if you like bargain and factory price is not low enough as you think, just don’t waste your time.Please trust the quotation we would give you, it is professional one.

Why should we choose you?

Chose happens because of quality, then price, we can give you both. Additionally, we can also offer professional products inquiry, products knowledge train(for agents), smooth goods delivery, excellent customer solution proposals.Our service formula: good quality+good price+good service=customer’s trust