Horizontal Debris Netting

horizontal debris netting  

• In the construction of buildings, vertical debris netting for safety is used to circle the building site to prevent the workers and building materials to fall down from the higher places.
• And the horizontal debris netting is used to prevent the building materials to fall down from higher places to hurt the workers in lower places. It is also used to prevent the workers falling down to the ground.

Easy to install due to the reinforced long lasting buttonholes on the edge.Features

Good raw materials offer high strength.

Flexible even in severe temperature.

Environmental-friendly, soft, anti-aging, corrosion resistant, worm resistant, cold resistant.

Long service life.

Specifications

• Material: high density polyethylene or polyethylene.
• Length: 50m - 200m or as required.
• Width: 1m - 5m or as required.
• Density: 55 - 240g per square meter.
• Shade Rate: 30% - 95%.
• Color: green, black, orange, gray, blue, white, etc.
• Packing: 5pcs, 10pcs or 20pcs/bundle or roll packing then in plastic bags.
• We can also pack as the customer’s requirement.

Vertical debris netting is used to prevent the worker and building materials falling down from the higher places. It can also keep the construction site clean.Applications
Construction safety netting is widely used in various construction sites, especially in higher buildings.

• Horizontal debris netting is used to avoid the possible harms to the workers caused by the falling building materials from the higher place. It can also prevent the workers falling down to the ground. It can be used in construction, installation work high above ground, power station, ship, water construction and various working sites.