FSL Series of Medical Rubbish Incinerator for hospital use

export seaworthy package
container: 20GP, 40GP

FSL Series of Medical Rubbish Incinerator

FSL series of medical rubbish incinerator is the medical rubbish treatment equipment jointly developed by China Aeronautical Project and Design Institute and our company by means of introducing the advanced technology from Japan. The product adopts the famous DAITO design structure of the Japanese incinerator the design of the one-off combustion chamber of which utilizes the gasifying incineration technology. It is due to this that the rubbish will not produce slag, frit, sintering and other problems during the incineration process. When comparing with the direct-fired furnace and other furnaces, the gasifying incinerator will produce fewer dusts. There is secondary incineration device and surrounding air supply device established in the secondary mixed incineration room. Under the circumstance with a high temperature, the combustible gas in the flue gas can be burnt thoroughly again, which is able to burn the gas incurred from the gasifier and the air on a high-effective basis and avoid the occurrence of the overflow of the carbon material and the phenomenon of being late to burn. Since the tangential entry, the tangential entry of the combustible air and other combustion-supporting modes are adopted when the flue gas enters the high-temperature burning-out room, it makes the flue gas burn in the burn-out room again on a through basis, meanwhile, the rotating airflow is utilized to carry out dust removal of the flue gas. The incineration flue gas remains within the incinerator for more than 2 seconds, which makes the combustible gas in the flue gas burn thoroughly together with that in the flying dust. Moreover, the dry exhaust purification equipment is established on the upper of the incinerator, and used to dissolve the odor and other components in incineration under the high temperature. The flue gas purification equipment has established calcium hydroxide filtration brick and acid gas carrying out neutralization reaction, resulting in the absorption of the acid gas and the purification of the tail gas and making the harmful components in the flue gas lower to the “control standard of the dangerous waste incineration pollution (GD18484-2001)” and the regulations of other standard.

The series of incinerator is equipped with the fully automatic procedure for control. After the rubbish is sent to the incinerator, fully automatic operation is carried out from ignition, one-off combustion, and secondary combustion to burning-out, which reduces the artificial labor strength. The design of the furnace door of the incinerator and the ash-clearing door adopt the seal structure with zip port mode. The incinerator will be totally isolated with the outside when burning, thus, the negative pressure combustion is formed and the possibility of the secondary pollution is avoided, particularly the treatment for SARS and other infectious dangerous medical waste better represents the unique advantage.

When comparing with the products in the similar kinds, FSL series of medical rubbish incinerator owns the following features:

1. The gasifying incineration technology is adopted, which is applied to the incineration injector, dropping container and other medical device as well as various kinds of paper waste materials, bandage, absorbent cotton, different kinds of medical pollutants and the wastes discharged by the hospital and medical organization.

2. Three-dimensional structure, small volume and site area, tight structure and relatively lower requirements to the supporting facilities.

3. The combustion mode of the aeroengine is adopted to make the flue gas tangentially enter the high-temperature burn-out room and the combustion air to the tangential enter other mode to make the flue gas burn again in the combustion chamber on a through basis, meanwhile, the rotating airflow is utilized to carry out dust removal of the flue gas.

4. The gasifying incineration mode is utilized to make the medical rubbish not produce frit, sintering and other problems during the incineration process. The rubbish produced each day can carry out incineration treatment.

5. The gasifying incineration, mixing incineration, burn-out treatment and other technologies are utilized to make the content of the flue gas and dioxins lower than the discharge standard regulated by the nation.

6. The gasifying incineration, mixing incineration, burn-out treatment and other technologies are utilized to make the content of the flue gas and dioxins lower than the discharge standard regulated by the nation.

Specification

Table 1 

Flue&Gas Emission Standards

Table 2

Our service

1. Operation instruction will be offered by telephone or e-mail if you need.
2. Technicians also can be arranged to help set up your project.
3. Data sheet will be sent to you if you need.

If you have any question, please tell us, we will do our best to help you!

We are professional manufacturer of various bar screen machine, wastewater treatment equipment, filter press, belt filter press, and vacuum filter, dissolved air floatation etc, and can supply you the most cost-effective products with best price!

Medical incinerator with good quality