hot sale high efficiency Poultry Feather Removal Machine for poultry slaughter

hot sale high efficiency Poultry Feather Removal Machine for poultry slaughter (fine Processing)

Product Description

 

Poultry Feather Removal Machin (fine Processing)  Introduction

Points for Operation of Chicken Plucker Machine 

1. Equip a leakage switch on the ground line.

2. Turn on the switch, and check if the machine running normally before using.

3. Wash the bucket of pluckers completely after usage.

4. The rubber plucking fingers could be worn-out or broken after using for long periods, they must be replaced in time,So as to ensure the working efficiency. 

Electric plucker Cost-effective electric chicken plucker

5. After a period of using, if the rolling disc become slower, it might be the belt screw track slip. Then please adjust the nut on the machine base, but note it can't be too tight.

Scientific installation design of rubber plucking fingers, which is easier to clean and replace

Larger size of rubber plucker fingers, more durable

The frame uses thickened 3x3 and turbine type thickened 4x4 angle iron. We use well-known brand motors.

Main Technical Specifications of chicken plucker machine

Structures of the pluckers

1-Stain steel tub

2-Rubber finger

3-Turntable

4-Seal plate

5-Feather discharge position

6-7-Bearing block

8-Driven pulley(dual trank)

9-Motor

10-Steel Frame

11-Motor belt

12-Main shaft

13-Water inlet connector

14-Upside down figher(push feater out)

Sincerely welcome you to visit, consult and negotiate business.
contact person:Maria Chen
Skype:maria072766
WhatApp/Tel:0086-18100336125