Hot New Style Drum Wood Chipper For Sale drum wood chipper electric hydraulic drum industrial wood chipper

Hot New Style Drum Wood Chipper For Sale drum wood chipper  electric hydraulic drum industrial wood chipper

Specifications

industrial wood chipper

1.Hot Drum Wood Chipper:
2.Adjustable output size;
3.High alloy cutting blades;
4.10-20% higher capacity;

Features of wood chipper machine:

1.Flexible adaptability. The design of this machine avoids making the foundation. And it is suitable for many different conditions, it does not influenced by weather and other external conditions.

2.Save time. This machine can put into produce directly which will save much time.

3.drum wood chipper has knives grinder,which can grind knives newer after certain time, then no need to change knives often. The full unite contains 4m length feeding conveyor ,outlet conveyor, knives grinder, electrical control cabinet ect.

4.drum wood chipper is mainly used to crush big wood logs or wood timber, wood branches, furniture waste into small chips , the thickness of last chips is 1.5mm-3mm, length and width about 20-50mm, by adjusting knives gap ,outlet chips dimension will be adjusted.

5.drum wood chipper contains 4m long feeding belt conveyor, when conveying logs, the speed can be adjusted .also it can connect with outlet conveyor to transport away crushed wood chips. the wood chipper can work on the ground-- outlet conveyor at the chipper bottom, then will no need to make foundation. Also can install outlet conveyor at the behind of wood chipper , then just need to do foundation under the ground .

Technical data of wood chipper machine:

Working Principle of  Crusher Machine: 

This machine is made up of feed inlet, upper cover, rotor, hammers, pin roll, outlet, motor, base, fan blower and cyclone etc.

Materials fall into the crushing room through feed inlet. Ther are crushed under the action of high 

speed rotating hammer blowing and screener friction, go through the screener hole and discharge

 from the outlet unser the action of centrifugal force and flow.

1.what's raw materials?

2.the moisture and size of raw materials?

3.how much production capacity you need? ( h OR d)

4.The shape and size of the final product you prefer?

5.are you product fuel or feed use it?