China New products Ultrafiltration/UF membrane system pipeline water purifie

 Typical flux (rate of finished water permeate per unit membrane surface area) for UF is 10-100 gallons per square foot per day (gfd).

Our UF membrane systems use advanced hollow fiber or ceramic technologies operated in the outside-in or inside-out direction of flow. Given the small membrane pore sizes used with these technologies, fouling due to deposition of organic and inorganic compounds on the membrane may occur if the system is not properly designed and operated. Therefore, we use automated backwashing, air scour and chemical flushing processes to maintain the rate of membrane fouling within acceptable limits. Chemical cleaning is employed once a maximum transmembrane pressure has been reached. Typical cleaning agents utilized include acids, caustic, surfactants, enzymes and certain oxidants, depending upon membrane material and fouling type.

Common Applications

Municipal drinking water filtration

Industrial Wastewater Recovery

COD Reduction

RO & NF Pre-treatment

Typical Features

Welded and Powder Coated Steel Skid Frames

High Quality Membrane Elements

Module Housings with Sampling Ports

Stainless Steel Feed Pump

Stainless Steel Schedule and/or 80 PVC Pipe Work

Automated Control Valves

Integrated Process Controls

Automatic Backwash System

Pressure Gauges

Flow Transmitters

Pressure Transmitters

(CIP) Clean-In-Place System

Optional Features

PLC/HMI/VFD Controls

Remote Data Interface via User-Defined Network Protocol

Redundant pumps

Feed and Process Tanks

Stainless Steel Skid Frames

VFD's

Hypochlorite & Acid Dosing

Coagulant Feed System

Gravity Drain Tanks