3.5 Inch simple GPS car hud A3 head up display windshield projection GPS

Specifacation:

Product Display 

User manual for Head Up Display

HUD short for Head Up Display.It displays driving datas on the front windshield such as speed on the car front window glass;avoiding drivers unsafety because of watching the instrument while driving.Drivers can read the driving information instantly , and can always keep the best state on the way with HUD.

HUD Main Functions&Features:

1. Available for any car, easy to install, plug and play

2. Screen 3.5 inch HD display

3. Multi-color design makes the screen more abundant and easier to read

4. Nano-technology to eliminate double reflections,more clear.

5. Rich Contents: speed,compass,single driving time and distance, local time,satellite number, altitude, speed alarm,free switch between km and miles

6. Auto power on/off: HUD start and off with vehicle started and shutdown, effective protection of the car battery;retaining the manual switch mode,more easy to control HUD.

7. Automatic and manual brightness adjustment mode,driving without glare.

Button Function

1: Icon for satellite signal: the light flashes when HUD searching for the satellite signal

2:Speed,voltage

3:Clock, driving distance,driving time

4: driving distance unit (KM and Mile)

5: light-sensor

6: Driving directions:west,north,east,south

7: Buzzer icon

8: Number for satellite

9: Voltage ,speed 

Host keys function:

1. USB cable port

2. Power switch

3.Setting button:Three way wave button, short or long press

a.Up button = up motion 

b.Ok button = inward button press

c.Down button = down motion 

Wave Button Function:

When the dial on the left

1. Vertical long Press 5 seconds: enter into setting menu(menu 1-8),after finish adjustment vertical long press 5 seconds to save.

2. Short pull up:Increasing parameter values after enter into menu setting.

3. Short pull down: Decreasing parameter values after enter into menu setting.

4. Vertical Short press:Switch between clock,driving distance,driving time(enter into menu option,vertical short press to adjust menu option)

5. Long pull down: turn on or off the alarm sound.

Reset setting:

When HUD is power on, vertically long press 5 seconds to enter into menu setting, short press for several times to menu 8, short pull down to parameter 1, after adjustment,long press in 5 seconds to save, then the reset will be finish.

Switching display contents:

Vertical short press:Switch between clock,driving distance,driving time

Turn on and off the buzzer:

Pull down the wave button 5 seconds to turn off the buzzer,another 5 seconds to turn on the buzzer.

Clock Adjustment:

Make sure your GMT(the default is GMT+8).According to your time zone to adjust HUD.Vertical press 5 seconds to enter into menu setting,short press 6 times to menu 6,parameter show(means GMT +8)up or down the wave button adjust to the time zone of your own country,and then vertical press in 5 seconds to return to the previous Since HUD receiving data from satelli,GPS data will be a little different with car dashboard data.At that time,you can enter into menu setting to have a fine adjustment of HUD in order to get the same data as dashboard.If you find there is something different with the the dashboard values,please make an adjustment as below:

Vertically press in the wave button 5 secondEnter into the menu setting (there are 3 directions for wave button: up,vertical,down),vertical long press, enter the menu setting,vertical short press 1 time , menu options will increase 1 unit,up and down the wave button to increase or decrease the parameter value. After adjustment,vertical long press 5 seconds to return the previous interface.

Quality First
Service Foremost
Custmers Supreme!