High Pressure PE Micro Spray Irrigation Tape(manufacturer)

Specifications

micro spraying tape sizes:

the hole type can all be single and the special sizes can be ordered.

Product Features:

1. The Water Margin: unilateral 1~3 meters, 2~6 meters bilateral

2. Save 50-80% labor, 40-80% water, 50% fertilizer and increase production 10-30%

3. High quality raw materials of high strength PE from the German Basf Inc and ultraviolet resistance ratio 

4. Laboratory Simulated Ecological testing anti-aging life of 3 years, the actual use of the ageing time longer; low supporting the water pressure, less energy consumption

5. Supporting pipeline water supply pressure [2~3Bar] lower, low energy consumption

6. Scientific aperture distribution design, smooth aperture not easy to block and high spraying uniformity, ensure the normal use in breezeless and breeze day, ideal for drizzle days

esigned for flexible use,easy to coil, no shortage for length 

8. Uniform irrigation, large irrigation area, increase production

9. Products passed the inspection of the national authority Chinese inspection department 

10.Easy storage and transportation,  simple and convenient for installation and the operation

it is widely used in lawn,trees,greenhouse,etc.

Use method of Micro spraying irrigation tape:

1 Before laying the micro irrigation tape, first to use drugs to kill the soil pests ( such as cricket etc) to prevent them fromdamaging crops, biting the micro spraying tape.

2 When laying the tape, holes should be upward,tail should be blocked. Then using the water pump to extrude. The water inlet shoud be with gauze wraped ( filter ) to prevent hole plug. In case of blockage, let the tail open, rinse with water for a minute or use hand and other toolsto tappe the pipe wall gently

3 According to your pump pressure and micro spraying tape working length, open the( three-way, four-way) switch first,preferably open several switchs, to prevent excessive pressure,and cause micro spray blow up at your first using time. If the pressure is not enough,turn off several switchs. So that you would know how many switched shuld be on. If one film for testof water is finished,open the switch first when change the film, then turn offthat the finished film of the switches, to preventimproper use of blasting.

4 When has the rotation, the micro spray tape should be extruded by the water pump, and wash, roll, put in the shade,prevent mice and other animals' bite, to prepare for the next use.