Hot sell wood sawdust pellet pressing machine/cotton stalk briquette machine

A: Final product of the wood sawdust pellet pressing machine:

The final briquette can be with 45mm to 90mm diameter, and the length can be controled, but for our briquette machine, we usually make the briuqette with 50cm length, and then use the briquette to heat the boiler or use the carbonization furnace to make the bbq charcoal; ALso, if you need the fixed length briquette, we have the automatic cutter to get the briquette with same length.

 Laboratory Test Report of Paddy Husk & Saw Dust Charcoal

B: Main data of the wood sawdust pellet pressing machine:

We have small capacity briquette machine and big capacity briquette machine. ANd also if these cannot meet your requirements, you can tell me the capacity you need, and we will give you the best solutions to you.

1. Small capacity briquette machine:

2. big capacity briquette machine:

C: Simple introduction of the wood sawdust pellet pressing machine:

This briquette machine is using the biomass, rice husk, sawdust, cotton stalk, wooden powder, bamboo powder etc as raw material to make the briquette under high remperature and high pressure. And the raw material moisture should be within 8-12%; and the size should be within 5mm size.

For using our briquette machine, you should do these steps first:

1. When connect the electricity, preheat the briquette machine to the appointed temperature(this is mainly according to your raw material);

2. when the temperature is reaching the appointed temperature, then feeding the material in the feeding port;

3. By the screw propeller and heating ring and forming tube working, you will get the briquette you need. but the briquette is hot, so you should wear the proximity gloves.

D: Spare parts of the wood sawdust pellet pressing machine:

The spare parts is screw proller, heating ring, forming tube. ANd if you need the different shape briquette, then you can purchase one more forming tube(our briquette machine has one screw propeller, one forming tube and three heating ring); And when you order, we will send you another one screw propeller for you for free, so buying one set briquette machine, you total have the spare parts are: two screw propellers, one forming tube, and three heating rings.

E: Product line to make the charcoal briquette:

1. Using the crusher to crush the raw material to small size which suits the briquette machine; ALso different raw material uses dfifferent crusher, so first I need to confirm the raw material first;

2.Using the dryer machine to dry the crushed material to suit the briquette machine; Also, I need to confirm the material moisture content and the capacity you need to provide you the suitable dryer machine;

3.Using the briquette machine to make the briquette; This briquette machine can make the briquette according to your requirements;

4.If you want to make the bbq charcoal, to choose one carbonization furnace is better. Also this carbonization furnace can carbonize the wood, log, branch, coconut shell, nuts shell, palm kernel shell, bamboo, wood briquette.

One set wood sawdust pellet pressing machine can be packed in one wooden case;

More sets wood chip sawdust briquette extruder machines or the product line can be packed in the standard container.

Gongyi xiaoyi Mingyang Machinery Plant is located in Zhengzhou City,which is the biggest manufacturing base of charcoal making machinery. And we are the one of the earliest and largest manufacturers of renewable fuel & energy equipment and related machinery. After 15 years development, now our company becomes an independent economic entity with the integration of science, engineering and trading department. Our products are widely accepted in both domestic and world markets, and also are exported to more than 30 countries, such as England, Russia, Sweden, Poland, Iran, Sudan, South Malaysia, Indonesia, Vietnam,etc. We have lots of experience to export and cooperate with all over the world, and we also sincerely welcome you to come to our factory to visit and watch our products and factory.

We have many kinds of certifications, famous in domestic and overseas, such as ISO Approved, CE Approved, SGS, BV and other certifications in our country. Such as Alibaba certifications, Made-in China, etc. You can find our factory and watch our products in many websites, We win in the strength, win in the quality and win in the service. This is why our clients choose us.

1. Pre-sale service: according to your special needs, design and manufacture products for you, provide you with project design, process design, purchase program.

2. On sale: accompany you to check the performance of the machine.

3. After-sale service: we will send engineers to install the equipments to put them into use as soon as possible, commissioning and training operators on site.

1. Contact me first and make a deal;

2. Sign order and then pay the down payment;

3. Receive the down payment, we arrange our factory to produce the machines;

4. After finished the manufacturing, we test, examine the machines;

5. The last step is to transport the machines to your country port. The whole line is finished.

Sales Manager: Ms. Bella Ren

Cellphone: 008615039052281

Skype: bella616919

Wechat: 008615039052281

Whatsapp: 008615039052281