Hot Sell Vibrating Feeder/ vibrating bowl feeder

Specifications

Vibrating bowl Feeder Introduction:

GZD series Vibrating feeder adopted vibrating motor as Exciter, which is generally installed in front of the primary crusher, conveys big blocks continuously and evenly while removing the dirt and impurities by screen bars. As necessary equipment, it can effectively control the feeding capacity to match with the capacity of the whole crushing plant. It features strong construction, easy to maintenance and operation. They are widely used in water conservancy & electricity, mining, building-material, silicate and chemical industry in the crushing and scr vantage eening plants.

Vibrating Feeder Features:

1) Vibrating feeder enjoys simple structure, stable vibrating, even feeding, good continuous performance, adjustable excitation force, etc. Its flow rate can be conveniently changed and controlled.
2)Vibrating feeder adopts eccentric block as the excitation source and features low noise, low energy consumption, good adjusting performance, and no material splashing.
3)Closed type vibrating feeder can prevent the pollution of dust.
4)The pressure caused by the material to the groove should be reduced to the greatest extend. The effective discharge opening should be smaller than the one quarter of the groove width. The flow rate should be controlled within 6-18m/min.
5)For feeding materials with a large quantity, a fender with enough height should be installed at the outlet. This fender should not be fixed to the feeder since it will affect the performance of the machine.

Vibrating Feeder Working principle:

Vibrating feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whose gearsare jogged. When installation, the two gears must be jogged according to the sign. Through drive of the motor, the two eccentric shafts start rotating to producea linear huge power which forces the feeder to vibrate. Through the vibration, the materials will slip and sling on the funnel, moving forward, when the materials. Pass the screening part, smaller parts will fall down, and avoiding the furthercrushing, so screening purpose can be reached.

Technical Parameters: