low cost brick making machine with good service and top quality

 low cost brick making machine with good service and top quality

Product introduction for brick machine

Non-Vacuum solid  brick making machine is the earliest and mature product. It usually takes one motor.It is suitable to the following buyers:

1>This machine is is suitable to make solid clay brick ,red clay brick ,red soil standard bricks, red mud brick etc,  Different molds can bring out different brick.

2>The material is rich and easy to find, such as Clay, shale, coal slack, fly ash etc It is very convenient to set up a factory and begin to make bricks.

3>Only wants to produce solid bricks (small hole brick is also possible if your raw material is fine enough for above 
30 model extruder)

The difference between non-vacuum and vacuum extruder 

1. Non-vacuum extruder usually can only produce solid bricks. . Vacuum brick is extruded out of the vacuum extruder. 
And non- vacuum extruder has no extraction equipment, so the brick hardness is not so much as vacuum bricks.
2.Because the vacuum brick is first extracted with air and water , naturally shorter firing time, rapid proto typing. Greatly reducing the production cycle.

The parameter for clay brick machine

The brick size for sample:

another hollow brick machine for making many different shapes of brick