XSB-7 8448pcs egg incubator/advanced full-automatic egg incubator

 XSB-7 8448pcs egg incubator/advanced full-automatic egg incubator

XS INCUBATOR FEATURES:

*Durable and easy to clean plastic cabinet

*Humidity system allows control of moisture and eliminates the need for water pans

*Can be directly connected to a water source

*Contact thermometer temperature control

*High temperature override which disables heater element if temperature spikes

*Can be single or multi-staged

*Removable top and back access panels facilitate cleaning

*Tongue-and groove, silicone sealed cabinet with stainless steel hardware

*Complete 45 degree turning of eggs in both directions

*Can accommodate most species by simply changing egg trays

*3 year parts warranty

*Toll free 24 hour tech support

*Optional Casters  

*Optional audible high temperature alarm

SPECIFICATION OF INCUBATORS

poultry incubator thermostat chicken egg incubator

1. Temperature display range is 0-99°

2. Temperature measurement precision is≤±0.1°C

3. Humidity display range is 0-99%RH

4. Humidity control precision is ±3% RH

5. Output channels is 9 channels (over temperature, temperature control, low temperature ,turn eggs left , turn eggs right ,humidity control ,alarm ,fan and light)

6. hatch rate above 96%, suitable for hatching all kinds of poultry and bird eggs

7. Eggs turning by electric actuator &programmer color steel plate appearance and aluminium alloy edge

8. Ventilation by vertical air moving fan ,controlled by an electric actuator and programmer.

9. Auto turning tilting the eggs 45°C once per half an hour (setter only).According to your actual request, you can set turning internal time you need.

10.  When buying our incubator, you can get free eggs tray, hatching out basket,

Coal & water dual-used bottle and pipe, technology direction books, hatching technology CDS, product manuals, and so on 

 PRODUCT PICTURES

FAQ in the hatching

 1.     the temperature is too hight all the time.

A} take apart of the controller, please check if the wire for NO.1, NO. 2 and NO. 3 is ok.

B} ambient temperature.

Please be sure the ambient temperature can not be above 30c, or it is bad for heat dissipation.

C} Close one heating tube, normally, there are two heating tube, if your side in very hot, you can close one heating tube.

D} open the ventilation hole.

E} please check if the water in the tank is hot. Normally, the water should be warm, if it is too hot, it can generate heat, so the temperature will be higher. If yes, please pour the cool water.

2. The heating tube doesn’t work .

A} take apart of the controller, change the wire 23 to 21, change the wire 24 to 22.

B} If you operate accoding to A, but it still doesn’t work, please check the heating tube, if not, please change a new heating tube, if the heating tube is good, there may be something wrong with the controller, you need to change a new controller.

3. low temperature.

hold the temperature sensor in the hand, please check if the figure on the controller is changed. If yes, please check the heating tube.

4.  some customer asked me why the chicken died in the shell after 18 days. There are two reasons.

a)        please check if you opened all the ventilation hole, because the chicken in this period need much oxygen, they may die because of the oxygen deficit.

b)      The humidity. You need to set the humidity higher than before in this period, it is easy for chicken to break the shell, or you may pul some water on the shell.