2017 hot sell ring die wood pellet machinery , biomass pellet machinery , straw pellet machinery

Product Application

MKL400-37 ring die wood pellet machine can press the sawdust into wood pellet for fuel in the  pellet stove, Boiler  for family use and industrial use.

the raw material require the moisture between 8%-15%, in powder state.

if your raw material is wood , you need grind them into powder first ( choose the hammer mill)

if your raw material moisture more than 15%, you need dry the raw material first( choose the dryer machine)

Main Features

1) Automatic lubricating system, screw feeder can adjust the sawdust enter into the pellet machine speed.

2) easy operate, you just turn on the switch, put the sawdust, control the speed by the cabinet, you can get firm wood pellet

3) ring die double size use, can use more than 1500 hours

4)roller and die are use the steel material, more durable,save cost

5) less noise while the machine working . 

6).Vertical feeding directly in place.
7). Die static, roller rotating, materials centrifugal, Evenly distributed around.
8).Double-layer dies, up and down dual-use, reduce the cost,enhance the efficiency, can be dual-use,high capacity,energy saving.
9).One die,different hole diameters, with different specifications to pelletize.
10).Macroporous die, wire joining circular tube, increasing travel, improving density.
11).Ring die,vertical structure,good for cooling the pelletizing room.
12). Independent and frequency conversion discharge device, to ensure that the rate of
pellet formation.

It is very easy to make wood pellet, you can check the below chart to understand easily.

Raw material 

Final wood pellet 

Machine Parts

Name: roller
a set of roller including 2 pieces. the roller introduce the new design,has the Dust cover and Tapered Roller Bearings

Main spare  parts

Name: die
the die use the steel material, with different compression ratio in order to make different pellet. it is the pellet machine corn . the die size you can choose 5mm,6mm,8mm,10mm,12mm,16mm and so on