best seller chinese economic waste copper wire granulating machine

Specifications

        Waste Copper Wire Granulating machine

Decription of  waste copper wire granulating machine

Waste  waste copper wire granulating machine  /cable recycling machine) is a kind of machinery used for recycling waste & scrap copper wire and cables, whose diameter should be below 25mm, such as Auto electric wire, Motorcycle electric wire, Computer wire and other various miscellaneous material cables, communication cables, etc. The recycling rate can reach 99.9%, can get copper granule and PVC plastic in the end automatically.

Copper granulator process:

 1. Starting:

 Please make sure all the   waste copper wire granulating machine in good condition. Before getting started, please keep the machine unloaded running for 5-10 minutes.

2. Feed inlet

 Please clear up iron from the mixed cables, avoiding damage to crusher blade.

 3. Fine crushing

 If there is any abnormal noise, please stop and check the crusher. Change different size screen, if the copper granule is too fine or too much copper without separating from plastic

 4. Vibrating separator

 After curshed, the mixed material will be delivered to vibrating device. The copper fro vibrating separator is complete copper without plastic, while the copper clad from the opposire discharging hole needs to be second crushed.

Crushing procedure---Conveying & dust-collecting---Separating process--- Copper collecting.

Main Data of copper wire granulator machine: