Iron Ore Magnetic Separation Laboratory Drum Magnetic Separator

Iron Ore Magnetic Separation Laboratory Drum Magnetic Separator

• iron ore magnetic separation

• magnetic drum separator manufacturers

• laboratory magnetic separator

Description of Magnetic Separator  :

CTB Series half upstream wet magnetic  separator is usually used for separating fine-grained iron magnetite from non-magnetic materials. Its composite magnetic system consists of high performance rare earth permanent magnet (main magnetic source) and ferrite permanent magnet.

Structure of Magnetic Separator :

CTB Series wet  magnetic separator consists of magnetic drum, tank body, support, feed box, discharge box (ore concentrate box), drive motor, motor reducer, control box, etc.

The  separator drum is made of stainless steel (thickness: 3mm) and covered with wear resistant rubber.

Working principle of Magnetic Separator :

1. When the raw materials flow into the tank body of the wet magnetic separator , firstly, the flowing direction of the raw materials is the same as the rotary direction of the magnetic drum, the iron magnetite materials are attracted to the surface of drum.

2. Secondly, the flushing water below flush the raw materials back for the second separation.

3. This time the flowing direction of the raw materials is oppo site to the rotary direction of the magnetic drum.

4. Then along with the rotation of drum, the iron magnetite materials on the surface of drum will finally leave the magnetic field and fall to the ore concentrate box under gravity.

5. Also, the flushing water above helps to flush the iron magnetite into the ore concentrate box. The weak magnetic and non-magnetic materials can not be attracted and will flow to the discharge pipe for tailings.

Structure drawing of Magnetic Separator:

T

Technical Parameter:

Delivery of our  Magnetic Separator

One Of Our Client's Mine Site:

Our certificates:

 Exhibition in Chile:

About us

Our company was established in 1995 with the registered capital of 1000000. We have more than 100 staffs: 18 research engineers ,60 technicians and expencienced after-sale service team. Our company covers an area of 20000 square meters and wons several awards of excellent local enterprise .We are acknowledged as the backbone enterprises in metallurgical industry.