China high capacity chute feeder with low price

China high capacity chute feeder with low price

1.Description

The Gold Ore Chute Feeder is suitable for concentrating, coal, chemical and other industry departments, the granular and piece materials are carried into different set from the storage bin, but not suitable for carrying the concentrate power and other power material

.

2.Application

The mining ore processing chute feeder is used to convey mineral lump from storage silo to equipment in industries like smelting, mining, chemical, building material, concentrating and coal, etc.

1. Mining Equipment iron/hemitate/chrome/ti ore beneficiation(chute feeder) can be installed on the ground or onto discharge port of ore bin.

2. The chute bottom plates do the reciprocating movement, the movement frequency is 20-60 times/min and the stroke is 20-200mm.

3. Stroke can be adjusted by the eccentric wheel; the eccentric throw is half of the stroke.

4.According to experience of some mine sites, the eccentric throw should no less than 30mm for cohesive ore.

5. The chute width is 2-2.5 times of maximum feeding granularity.

6. The biggest chute feeder can supply ore with granularity less than 500mm.

7. The most common specification is 980 x 1240 chute feeder, with feeding granularity between 350-0mm, which is the best partner of 400 x 600 jaw crusher.

3.Specification of high capacity mining ore processing chute feeder

4.Working principle

The mining ore processing chute feeder is usually installed underneath the discharging opening of ore bin. Minerals fall on the bushing. The bushing is located at the chute bottom, configured on idler wheel and via eccentric device connected with reducer which is linked to electric motor by coupler. When it works, electric motor drives reducer via coupler; eccentric disk and drain cap which is situated between chute frame bottom and roller begin to do reciprocal and linear motion so as to uniformly feed minerals.

5.About US

 Our company was established in 1995,the registered capital of 1000000,more than 100 staff,research engineer 18 people,technical workers 60,after sale service team of more than People ,has advanced machine tool equipment,testing equipment,the company covers an area of 20000 square and won several awards for businedd excellence,it is county of key enterprises,the company many times by as the contract and trustworthy enterprise ,after sale service advanced unit,is the metallurgical industry backbone enterprises od processing machinery.

6.FAQ:

Q:Are you the manufacturer?

A:Yes,we are Manufacturer ,not Dealer.Direct factory sale makes price more competitive.

Q: Can I visit your factory

A: Yes. Many domestic and international customers are always visit our factory every year.

Q: How long is the warranty of your equipment?

A: Our warranty period is one year generally.

Q: Do you provide after-sale service?

A: Yes, after sale service for the whole using life.

Q: Do you provide equipment testing and training?

A: Yes. we offer testing and traning on-site andwe can also send professional engineers to the working site for equipment installation, adjustment, and operation training.

Q: Do you provide product installation flow chart?

A: Yes. Our experienced engineers are provide product installation drawings.