Home > Products > Iron tower > Fire Tower
Fire Tower
You May Like
Product Description
Fire station building design standards "GNJ1--81" of the sixth chapter of the construction of fire fighting training tower requirements and production standards attached to article 6.0.1 fire station shall be set up in the training tower, the front should be not less
than 35 meters in length of the runway.
Training tower should meet the following requirements: first, the training tower should be located in the vicinity of the training ground at the end of the site reserved for the runway, the tower reserved 1.5 Misha pit. Two, the training tower should be not less than four layers, more high-rise buildings in the city, the number of layers can be appropriately increased. Three, the training tower facade of each layer of not less than two, according to the window (wall) width of 1 meters. Four, the training tower window size is 1.2 meters by 1.8 meters, the tower window distance not less than 0.65 meters, 0.35 meters wide window, window board thickness (0.05 prominent tower wall 5 cm), each
layer of the window from the ground floor height of 0.8 meters, is 3.5 meters high, and should be in a staircase width of not less than 0.7 metres, stair handrail pipe diameter not less than 0.026 meters. Five, in the training tower should be set within each layer of not less than 1.5 meters wide platform, the top floor should be set. Six, the training tower should be equipped with outdoor fire ladder. Fire ladder to the top of the tower, and 3 meters from the ground should be set up, the width should not be less than 50 cm. Training tower Description: 1, mainly by the (1) simulation window, (2) floor partition, (3) after the skeleton, (4) observation, command platform skeleton and the main steel frame structure. The front end of the tower body is provided with an analog window (a plurality of layers of windows are customized according to requirements). 2, the back of the tower body is provided with a rear frame corresponding to the simulation window. 3, the simulation window and the floor partition and the back frame and the main frame are connected with each other by bolts. 4, there is a safety stair connection between the layers. 5, the top of the tower is equipped with lookout, command platform. Seven, the general treatment of the training tower for spray painting, color green army. Or camouflage and galvanized. Eight, steel structure fire training tower functional, with a detachable and can be installed, without geographical restrictions, topography, land, material of the assembled parts, the cost is low and the recovery rate is high, greatly saving funds for the troops, training to achieve a multiplier effect. Welcome to the fire fighting units ordered the fire tower.
Contact Us
- Hengshui Broad Silver Tower Co., Ltd.
- Contact nameMr.Xu Minhao Chat Now
- Phone86-0318-18732897267
- AddressGuang Chuan Zhen, Hengshui, Hebei
Product Categories
| Iron tower |
Popular Searches
- cooling system
- cooling machine
- cooling equipment
- spray nozzle
- aluminum ladder
- steel structure
- nitrogen generator
- tower crane
- tower bolt
- fire fighting truck
- fire fighting vehicle
- power transmission
- mobile tower
- steel tower
- communication tower
- steel pole
- tower light
- aluminum scaffold
- aluminum platform
- mobile ladder
- power distribution
- lattice steel tower
- industrial nitrogen generator
- observation tower
- fire monitor tower
- cooling system
- cooling machine
- cooling equipment
- cooling tower
- aluminum ladder
Recommended Products
- High Temperature Electric Heating Element Double Thread Silicon Carbide Heater
- BOLI MESH/ 3*0.20+6*0.35 HT HT Tear-Resistant Dipped Steel Cord Fabric for Making Conveyor Belt /Steel Cord Fabric for Conveyor Belt
- BOLI MESH/3*7*0.20 HE HT Tear-Resistant Dipped Steel Cord Fabric for Making Conveyor Belt /Steel Cord Fabric for Conveyor Belt
- BOLI MESH/3+9*0.22+1HT HT Tear-Resistant Dipped Steel Cord Fabric for Making Conveyor Belt /Steel Cord Fabric for Conveyor Belt
- BOLI MESH/3+9+15*0.22+0.15 HT Tear-Resistant Dipped Steel Cord Fabric for Making Conveyor Belt /Steel Cord Fabric for Conveyor Belt
- BOLI MESH/3+9+15*0.175+0.15 HT Tear-Resistant Dipped Steel Cord Fabric for Making Conveyor Belt /Steel Cord Fabric for Conveyor Belt
- BOLI MESH/2+2*0.35 HT Tear-Resistant Dipped Steel Cord Fabric for Making Conveyor Belt /Steel Cord Fabric for Conveyor Belt
- BOLI MESH/ 3x4x0.22HE Tear-Resistant Dipped Steel Cord Fabric for Making Conveyor Belt /Steel Cord Fabric for Conveyor Belt 2+2X0.25ht
- BOLI MESH/Tear-Resistant Dipped Steel Cord Fabric for Making Conveyor Belt /Steel Cord Fabric for Making Tyre 2*0.30mm Belt
- Buy Tear-Resistant Dipped Steel Cord Fabric for Making Rubber Conveyor Belt/Steel Cord Fabric for Making Tyre 2*0.30mm Belt
- Buy Tear-Resistant Dipped Steel Cord Fabric for Conveyor Belt /Steel Cord Fabric for Making Tyre 2*0.30mm Belt
- Where to Buy Tear-Resistant Dipped Steel Cord Fabric for Conveyor Belt /Steel Cord Fabric for Making Tyre 2*0.30mm Belt
Find Similar Products By Category
- Metallurgy, Mineral & Energy > Black Metal & Products
Product Tags:
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Mr.Xu Minhao
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile



Decorative Tower
Monitoring Tower
Steel Tube Tower
Microwave Tower