Top grade polyacrylamide/PAM for water treatment

Specifications

Polyacrylamide(PAM)

 Product introduction:

The PAM is uses acrylamide aqueous solution as raw material, under the role of the initiator, the polymerization reaction was conducted after the completion of the reaction generated by cutting the polyacrylamide gel block, granulated, dried, pulverized, finally obtained polyacrylamide products. According to the characteristics are divided into non-ionic, anionic, cationic and amphoteric type of four types.

Usage:

1. Used for sludge dewatering: according to the properties of sludge can choice of the corresponding model, which can effectively before the sludge into the filter press sludge dewatering, dehydration with high effectively, the mud cake moisture content below 80%.

2. For living sewage and organic wastewater treatment, the product showed electropositive in alkaline medium, it is very effective for the product in the sewage wastewater suspended particles with a negative charge flocculation and clarification.

3. Top water for river water for water treatment flocculant, with less, effective, and low coat.

4. Papermaking enhancers and other additives, Improve the retention rate as filters, pigments, and paper strength.

5. Used for oil field additives, such as clay anti-swelling agent, oil acidification thickener.

6.Used in textile sizing agents, stable slurry properties, less halling pulp, fabric breakage rate is low, clean cloth.

Packaging and storage:

This product is non-toxic, pay attention to moisture, rain, avoid sun exposure.

Specifications: 

Our products:

Our packing: