Stainless Steel PTC Heating Element Plate

Electric Cartridge Heater

 Material:SS304;SS316,SS321,NICOLOY800 etc

Insulation Material:High-purity Mgo

Reisistance wire element:Ni-Cr or FeCr

Lead Connection Option: Crimped or Swaged leads

Lead and type of connection leads, 10" Fiberglass Standard(Wire options:Teflon,silicone high temperature frberglass)

Commom cartridge can be devideded :

1) High power density (heat area sufuce power 10~25w/cm2)

Working temperature≤450 degrees.

2) middle,low power density (heat area sufuce power 5~11/cm2)

working temperature≤ 300 degrees

Votage:12~250V (or as requirment)

High Density Construction:

High-quality stainless steel construction provides long-lasting protection even in the most rugged industrial environments

Protected with a stainless steel sheath, their watt density can reach 50 W/cm2 and their operating temperature can go up to 800°C

  Product Features:
    The main characteristic are safety performance and constant temperature.  PTC heating is a new kind heater in the market .It is fixied by a pair of metal electrodes with leads on both sides of PTC element.Ours copper imported from Japan. Harnesses are made of Teflon materials weaving wire, terminals installed firmly, to ensure that the wiring harness in good condition .

Technical Detail:
Operating temperature range ºC : 50 ~ 300
Rated voltage: 1 ~ 600v
Surface temperature ºC: 45 ~ 300
Surface temperature toleranceºC: ±5
Normal temperature resistance: Ω0.5~9000
Workig lifespan: 50,000hrs

product advantages:
1.PTC  heater cost savings, long life.
2.PTC heater safety, environmental protection.
     Design of the heating temperature of the heater body at 260 degrees Celsius, under any circumstances use will not produce "red", "burning" phenomenon, which cause burns, fire and other safety hazards. 
3.PTC ceramic heaters save energy.
     ptc heater and conventional heaters in the case of the same power, their power consumption is the same, but because of ptc electric energy into heat energy efficient than traditional heaters, the heat generated by the more, whereas in the production of heat under the same circumstances, the conventional heater energy consumption to be more than the power consumed by the PTC heater, PTC ceramic heater is saving energy.
   4. When the power stable,  it will give out the constant temperature continuous
Keep steady power
It can control the temperature by itself
Used in large range of voltage from 12V to 380V
Dimension is nimble various

Applications:
 PTCheating element are widely used for air conditioning, air curtain, ptc heaters, dryers, hand dryer, drying room equipment, large industrial air duct heating, electric locomotives warm, heating control cabinet, moisture, and other fields.