Pre-sensitized Positive Offset Aluminium Printing Plate

We are a manufacture of new PS plates, UV-CTP plate(CTcP)  and Thermal CTP plate,which owns 4m single  plate successive assembly-line and plate wrapping assembly-line. So it is capable to reproduce plate and produce high-quality plate. Therefore, the company can offer various specification of plate to meet your different demands. Moreover, our products are sold in more than 30 provinces and regions nationwide , and also our products have good credibility.

CTP-Thermal Plate 

UV-CTP/CTCP Plate

PS Positive Plate

PS Negative Plate

1)Gauge: 0.15mm to 0.30mm with any sizes you want

2)High quality

3)High impress time

  Pre-sensitized Positive Offset Aluminium Printing Plate

Pre-sensitized Positive Offset Aluminium Printing Plate

1) Highly photosensitive material reduces exposure time by 1/3
2) Color changes after exposure, making it easy to check the image
3) Mat surface helps keep contact between film and plate
4) Weak alkaline coating protects the environment

Plate exposure:

Light source:

 Huaxing PS plate can be exposed with HP mercury lamp, pulse xenon lamp, iodine-gallium lamp. But the best choice is iodine-gallium lamp.

Exposure time:

the base is gray gradient with 0.15 density difference. After 3rd grade gradient exposition, the sensitive layer is clean basically, and no-inking is the best exposure.

Developing:

 The Huaxing PS plate will be used special developing powder, either machine or manually developing. Besides, other alkalescence developing liquids are also available.Usage: dissolve each bag powder with 5L warm water into concentrated liquid, then fill water to dilute to 20L. then you can use immediately. The concentrated liquid and dilute liquid will be storage with seal.

Developing temperature:

The developing temperature is very important. The higher temperature will made PS plate lose networks, of course, the printing ability will lower. Otherwise, the developing ability will be too low to develop well, and also the plate is prone to getting dirty. So The proper developing temperature is normally at 20-250C. The developing time can not exceed 60s