UV Clarifying Pond Equipment UV Light

Pond UV light Instruction:

1.The body shell inclined in order to draw the air &bulb in the pipe and the body.several minutes later,please check whether the water is circulating or leaking.

2.Please mustn't  connect it with the power source before finishing the assembly  of all the  spare parts.

3.The product can kill the harmful germs and algae so that it will make a suitable & healthy living conditions for the ornamental fishes.

4.Place in the aquarium,when placing the product in the aquarium ,please fix the rubber feet onto the glass surface ,then slightly regulate the fitting brackets and finally fix them.

5.Place in the flat postion .Please fix the brackets onto the plate with the screws.

6.Please connect the soft ruber pipe (connecting with the inlet)withe the outlet of the filter.

7.If there is some dusts or sands in the body ,it will hurt the quartz tube.So please equip the filters in the inlet of the circulation pump.

8.Please fix the soft rubber pipe connecting with the outlet onto the auqarium.After examining  the soft rubber pipe and interface,let the water circulation work.

9.After the start of the UVlamp ,Please make sure that the electrical voltage,frequency used are consistent with the indication on the scutcheon of the UVC filter.

10.Please equip it at the steady& safe places in order to prevent its drop or shock because UVClight is made of auartz glass.

Pond UV light Caution:

1.UVC IS harmful to the eyes and skin.Please don't watch UVC directly or let the skin approach to the UVC.

2.Please cut off the power source when equipping or repairing the product in the auqarium.

3.Please don't use the product in the water.

4.Please do n't connect the UV light with the power source if there is no water circulation.

5.In order not to influence the water pressure against the body shell,please don't equip the switch between the body shell and the pipe of the aquarium.

CUV-1 Series light  Details Information:

UV-Light Details informaton picture: