eSUN polycaprolactone (polymorph)for coral reef frag glue application in aquarium

 Technical Data:

Name: Polycaprolactone

CAS No.: 24980-41-4

MF: (C6H10O2)n

Brand Name: eSUN

Model Number: MW50000, 60000, 80000

Other Names: polymorph, instamorph, thermomorph, homopolymer,plastimake.

Average Molecular Weight: 50000-120000

Content: ≥99.5%

Moisture:≤500ppm

Heavy melt content:≤10ppm

Melting Point (° C): 58~60

Density (g/cm3, 25° C): 1.08-1.12

Take off the swing index (g/10min, 60° C): 1-60

Advantages:

1. Low melting point, excellent viscosity and good compatibility.

2. It can be used as water purification agent, getting rid of the Nitrate nitrogen in the water.

3. Non-toxic, bio-material, fully biodegradable and easy to dye.

Products Description:

The new polycaprolactone coral reef glue is eSUN thermoplastic moldable plastic that is a unique alternative to two-part epoxies and other reef glues. 

Unlike the traditional two-part epoxies (that can make your skimmer go nuts) or super glue gels, the plastic beads are melted in hot water with 58~60℃

and then kneaded together to form a moldable plastic that can be used to glue live rock or dry reef rock together for unique aquascaping, mounting your

coral frags to live rock, or a myriad of other uses.It also can glue the coral frag with your decorations.

As polycaprolactone is 100% non-toxic, it does not affect your aquarium`s water chemistry and will not cause your protein skimmer to overflow. Perfect for gluing reef rock together

or for attaching corals to your rockwork. It is also biodegradable (in soil conditions). 

Because of its feature of getting rid of the Nitrate nitrogen in the water, it could also be used as water purification in the aquarium in a large range.               

The polycaprolactone coral reef glue comes in either white or colorful (a mix of white and colored pellets), by mixing the colored polycaprolactone with

the white pellets. You can choose any you need.

Usage:

· Esun Polycaprolactone pellets in hot water (does not need to be boiling hot).

· Dip the pellets for 2 minutes or until all the pellets turns to clear and soft..

· Remove fused pellets from hot water and mold/knead by hand. Then you can glue the things you want.

· When you finish the glue, dip it into the cold water for 2minutes or cool it around 5minutes. It will become very hard after it cools.

  Usage method for handmade, DIY.

 Package:

 Factory photos

1.How many years we have been in this area?

Around 15 years since 2002.

2.Where have you  exported to?

80% of our products are exported all over the world, mostly Europe countries and Asia countries since 2002.

3.Are you the manufacturer or trade company?

We are the professional PCL manufacturer and our factory is located in Hubei province. Our head office is located in Shenzhen.

4.What's the delivery time?

Usually within 3-5 work days after receiving the payment .

5.What's your package method?

Our common package is 25kg/ Kraft paper bag, also small package in clear jars. Besides, it could be costomized.

6.What's your payment?

By T/T or PayPal.

If any further questions or interest about our products and company, welcome to send us inquiry or chat directly with us online by Trademanager!