2014 new type flotation machine for Copper ore ,gold ore processing equipment

Specifications

   froth flotation machine

Flotation machine application

Flotation machine (also called Flotation separator) is applicable for the separation of Gold ore, copper oreand ferrous metal and nonmetal, such as fluorite and talc.

The impeller is driven by V-belts, which can bring the centrifugal effect to form the negative pressure. On the one hand, to inhale sufficient air to mix with ore pulp; on the other hand, to stir ore pulp and mix with medication to form the mineralized froth. To adjust the height of flashboard to control the liquid level and make the useful froth scraped by loam board.

Flotation machine working principle

When flotation machine works, slurry is inhaled from the bottom of the trough to the space between impellers. Meanwhile, the low pressure air send by fan is sent to this area through the air distributor in the hollow shaft. After sufficient mixing, the slurry is pushed out by the impeller, and then goes to the whole trough. When the froth rises to the stable level, after the enrichment processing, froth overflows to the froth trough from the overflow weir. Another part of ore slurry flows to lower part of impeller for the remixing with air. The remained slurry flows to the next trough until it becomes residue.

Flotation machine Operating instruction

To check the bolts before starting the machine and to use hands instead of impellers to prevent the sediment from adding the burden of electromotor.To adjust the height of strobe carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder. The impellers and stators should have a distance and should be changed when they are worn. The bearing in the pump should be maintained every three months.

Product features of Flotation machine

1. Reasonable design

2. High-efficiency

3. Low consumption, energy saving

4. Easy to maintain

5. Easy to operate

Operating instruction

To check the bolts before starting the machine and to use hands instead of impellers to prevent the sediment from adding the burden of electromotor.To adjust the height of strobe carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder. The impellers and stators should have a distance and should be changed when they are worn. The bearing in the pump should be maintained every three months.

Technical parameters of SF flotation machine+86 15036078775

   smaller parts in wooden box ,big parts in standard container

After we signed the purchase contract and have a certain reputation guarantee, 

we will contact the professional group that responsible for ship bookings, commodity inspection, 

commercial invoices, packing list, insurance policy and so on, in order to provide you the perfect goods trading services, 

until the product you purchased properly to your hands.

installation engineer team at the same time the product 

properly to the destination, in order to supply you a full range of products installation services. For some typical 

problems, our rigorous installed engineers also will do some certain installation debugging training, etc.

Technological support:

Dahua has been largely adopting new technologies, new techniques and high-tech equipments. And DH also has strict and effective quality control system. We have obtained ISO9001:2000 quality 

system certificate.

If there is any problem with your production plant, our professional technicians will be appointed to the production site

 to guide the equipment installment, debug the site and train the operator. Whenever you need,DH will the first one

 to help you. Dahua is the preferred choice for crushing, mining and quarry processing.

FOB ,CIF ,CFR ,EXW is avalible for us .

payment term : TT or LC is avalible .

Export country of the  Copper ore processing equipment Flotation Machine: 
India, Vietnam, Kazakhstan, Mongolia, Ecuador, Iran, Pakistan, Australia, the Middle East and other countries and areas. 
Working Principle of the  Copper ore processing equipment Flotation Machine: 
Flotation machine is applicable for the separation of nonferrous metal and ferrous metals, such as fluorite and talc. The impeller is driven by V-belts, which can bring the centrifugal effect to form negative pressure. While extracting sufficient air to mix with ore pulp, the machine stirs ore pulp and mixes it with chemicals to form mineralized froth. By adjusting the height of the flash board to control the liquid level, the useful froth can be scraped from the loam board. The height of the strobe must be adjusted carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder. The impellers and stators should be kept at a distance and should be changed when worn., The bearing in the pump should be maintained every three months.