CPAM/Polyacrylamide/SGS certificate/wecome to visit Hongtai Water Treatment Material Factory

Specifications

Polyacrylamide PAM

Brief induction:

1.It is commonly known as flocculants or cohesion agent, sub-cation, anion type, the molecular weight between 400-1800 million, 2.The product appearance is white or slightly yellow powder, soluble in water.

3.In particular, acidic water, acid and organic matter and the red mud suspension turbidity from flocculation sedimentation and separation of the role of liquid mud, use less water so low cost, flocculant can not be replaced by other products.

Features of PAM:
1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Solid content: 88% minimum
5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6) Dissolving time: 2 hours maximum (10°C)
7) Insoluble: 0.5% maximum
8) Monomer free: 0.05% maximum

Product Description:

Polyacrylamide (PAM) is water-soluble polymer, not insoluble in most organic solvents, has the feasure 

of  good flocculation , can reduce the friction   between liquid,  they can be divided into four types by 

ion characteristic they are nonionic, anion and cation and bisexual type .

Application:

1In papermaking process ,can improve the wet strength ,used for retention aid agent, intensifier.

2Used for coagulant, flocculation agent, sludge dehydrating agents in water treatment.

3)Used for drop agent and driving agent in oil exploration

4)PAM is also widely used for thickening, stable friction reduction, colloid, binding, film, biomedical 

materials etc.