Hot selling professional coconut shell carbonization stove

Professional coconut shell carbonization stove

Introduction of carbonization stove

Carbonization stove  is a machine to make charcoal from waste of agriculture and forest, such as rice straw,rice husk,sawdust, charcoal kiln utilizes the material in the carbonization process, produce the carbon monoxide, methane, oxygen and combustible gas recovery and purification, circulation combustion of advanced technology. 

Which could solve the ordinary coking furnace in the coking process of smoke pollution to the environment problem, and solves the charcoal machine equipment the heat problem,fully done autonomous self, improve the equipment continuity, economy, make full use of agriculture and forestry residues, which make the reduced the our country forest resources supply and demand contradiction nervous, greening the environment to do more contribution.

How to use the coconut shell carbonization stove

1.There have 4 of steel drums at the top of the machine body. Under each drum, it’s a small room to make fire.

2.The 4 drum have lids on top, and in the middle of the lids, there also connect with 4 pipes, is used for gases to escape (gases will come out when heating the drum). This pipe is called the "retort." Fill the retort with the chunks of hard wood and place the lid on top.

3.Place wood and start the fire at the bottom of the drums. Place the retort inside the drum, resting it on the fire.

4.Wait for the fire to get really hot

5.Keep an eye on the smoke. You should be burning for about three hours and the smoke should be……, which means that the water, tar and other compounds in the hardwood chunks are being released. Keep the temperature up by occasionally adding wood to fire.

6.Watch for the smoke ……, which means the gases have been burned out. Pull the rods out to drop the retort into the burned wood and ashes, stopping the flow of air to the charcoal inside.

7.Wait an hour, then lift the retort out of the drums. Wear welder's gloves, as the retort may not be cool enough to handle. Place the retort in dirt and allow it to cool further.

8.After about two more hours, check to see if the retort is cool enough to touch. If so, remove the lid to check the results of your burn. If successful, the hardwood chunks inside should have reduced by about a third, and been converted to lump charcoal.

Technical parameters of coconut shell carbonization stove

The whole carbonization process of coconut shell

1.These coconut shells come from my  Philippines customers 

2.Putting them into coconut shell carbonization stove

3.Sealing the door with clay and burning them

4.After enough time, you can get charcoal

Crushing coconut shell charcoal, molding and burning samples

If you still want to have coconut shell charcoal briquette as the BBQ charcoal, we can offer different briquetting machine and whole production line

Coconut shells charcoal briquette is smokeless, no smell, can keep burning around 2.5 hours.If you want to know more details of our coconut shells carbonization stove, welcome to contact me!

Contact person:Sunshine Yu

Skype:sunshine110077

QQ:1536089365

Mob:0086-15038021962