air flow high capacity carbonization furnace Machine to make bbq charcoal

Introduction of Machine to make bbq charcoal :

Our  Machine to make bbq charcoal includes one outer stove, three inner stoves, 

three covers, one hoist and a purify system. This design increased the effect largely, and at the same time, it decrease the pollution, have no smoke. 

With the development of the social, people realized the importance of environment 

gradually, a great deal number of people use dust charcoal, this furnace became popular.

Advantages of Machine to make bbq charcoal:

1. High capacity, short carbonized time, about 8-12 hours one port, can work continuously

2. Can move according to clients' request

3. High automation and high capacity, can save 80% labor

4. Environmental, can reuse the redundant smoke

Parameter of Machine to make bbq charcoal:

Structure of machine to make bbq charcoal:

The whole process of machine to make bbq charcoal:

Prepared work: keep one inner pot down, then put the raw materials into the inner pot, 

use the hoist or crane to hoist the inner pot (with raw material) into the main stove, and 

cover it, then seal it well.

Heating process: use wood wastes or gas as the fuel to heat the furnace, after 80-120 

minutes, stop heating when the temperature reach 280-330 °C.

Carbonized process: then change the fire into low heat, carbonize 8-10 hours, this process 

may produce some smoke, gas and wood tar, do not worry about it, we have purify system 

can deal with it, and the redundant smoke can be reused as fuel to heat the furnace. Thus 

can recycle the smoke.

Cooling process: after that, hoist the finished inner pot out for cooling, and put another 

inner pot in the outer pot to heat.

Notice: if you want to produce wood charcoal with different shapes, you can make them 

into shapes you want, then put them in order in the furnace.

machine to make bbq charcoal:

Final products of machine to make bbq charcoal:

Difference with other furnace:

 Thickness of outer stove is: wall --- 5mm, bottom --- 12mm, other supplier uses 3mm and 

8mm.

 Thickness of Inner pot is: wall --- 8mm, bottom --- 10mm, other supplier uses 4mm and 

6mm.

 The brick we used for building outer stove is good quality, high temperature resistance, 

white refractory bricks. Other supply uses common bricks.

The  Machine to make bbq charcoal is too big, we would put it into the container, then fix it well and also can pack accoring to your request. the external dimension is 1.85*1.85*2.37m

Before sale: Help customers choose the most suitable equipments; provide advanced, 

energy-savingand practical flow chart as well as responsible for designing the site.
                                                                                                                                           

 On sale: Inspect the product seriously before out of the factory; invite customer for 

commissioning in the spot and raising the objection; organize to delivery according to the 

contract.

  After sale: Company can send technical datas for guiding to install debug the machine. 

We also can provide 24-hour telephone or message service.

♦ How to operate this Machine to make bbq charcoal?

--- We put materials into the inner pot directly, then put Inner pot into main furnace by 

hoisting tools or crane, after carbonizing 8-10hours, hang out Inner pot, let it cool by 

nature. At the same time, we put another inner pot inside, continue to carbonize next 

biomass materials.

♦ Does your machine has environmental pollution?

--- No Pollution and No Smoke.

♦ Why No Pollution and No Smoke?

--- At the beginning of carbonization, the smoke return to the water box

--- After carbonize about 40mins, it will produce the gas, the gas will return to main 

furnacfe, it get burning.

--- There has special pipe for dealing with tar oil.

Our company are professional in making carbonization furnace. We have airflow and natural carbonization furnace can attach different needs. We are a productive entity enterprise. 

We improve it according to market trend. We have a strong technical team, constantly 

develop new products. Except that we also hold pellet machine, briquette machine, 

crusher, dryer and plastering machine etc. 

Welcome to our factory on-the spot investigation.

Contact way:

Gongyi Dongxing Company

Add: Xinhua Road, Gongyi City, Henan Province, China

Tel: 86-371-85617836

Fax: 86-371-85617836

Website:  http://hngydx.en.china.cn/

If you have any questions, please do not hesitate to contact me, we promise we will  offer the best machine with reasonable price. Welcome to visit our factory to check the 

charcoal kiln at any time, we can pick you up at the near airport or railway station.

Machine to make bbq charcoal