China surface mechanical polishing Plant

Specifications

The device is designed for the wheel hub finishing

Which Can complete the rough polishing , the fine polishing , bright polishing with different grinding ways

It can replaces 70-80 % of manual grinding ( surface irregularities still need large artificial repair ) .

principle

After The hub is fixed on the spindle then fill it with abrasive and polishing agent .

Two vibrators installed with a certain Angle will drive the machine with abrasive and polishing agent to do the three-dimensional reciprocating motion , the abrasive will cause the collision with the hub , extrusion, scribing and other effects, the abrasive will always in the free state to achieve the effect of the polishing of the hub .at the same time the polishing agent will ensure the bright appearance of the hub .

parameters:

Polish quantity at one time:   1pcs

Finish time:      10minutes

Other materials : Aluminum alloy polishing agent

Aluminum alloy abrasive (Equipped by user )

4. Packing details.

DZ Vibratory Finishing Machine is firmly packed in a plywood case in a whole. And the machine will be wrapped with thin films to protect the outside paint from scraping.