Prison GSM management electric fencing power fencing high voltage shock electric fence

Safety Information: 

• Unless high/low voltage output disarmed of Seuciry prison electric fence, don’t touch live fence
• Always unplug the fence before handing any part of the fence
• Don’t install electric fence during the thunder, don’t install controller in moist place.
• Before installation or using the product, professional training on technology is necessary
• To maximizing the performance of your fence system,During the installation, follow the instructions to make sure the grounding of products. Refer to “4.9 item”
• Once electrified , the inside of controller is 220v 50Hz AC, with 5-10KV high voltage pulse on the output port , don’t touch any part to make sure safety
• The related electronic technology knowledge is necessary, read the user instruction and operate it carefully with correct methods before installation, otherwise,our side don’t bear any responsibility if any accident arise.
• In case of urgency, turn off power supply, and wait for the professional staffs to check, analysis and repair ,or contact our company, don’t repack it by your own.
• ØFollow all national,state and local regulations that may apply to installation of electric fence in your area
• Refer to authorized repair center or our company for service,There are no ueser serviceable parts,Never alter the design of the energizer ,doing so is dangerous and will void the warranty.
• Do not run fence wire above ground near high voltage power lines.if too close,the electric fence may pick up dangerous levels of power from high voltage lines.Never cross under a high voltage line with electric fence.
• Sparks may occor in electric fence system,Therefore,the area of high fire risk,fence should not be installed.

Electrical specification:

1.    Input: AC110-240V or DC12V

2.    Output peak voltage: 5KV~10KV 

3.    Output low voltage:  1KV~3KV

4.    Pulse duration: ≤0.1s

5.    Pulse interval time: 1s

6.    Max energy of output: <5.0J

Prison management security Electric fencing system Project installation gallary:

Feature:

1.    New generation energizer that can be used as a simple security fencing energizer, but can also be a alarm panel,there are two alarm input for gate magnetic contacts or Infrared detector or other kind of sensor and detector with NO/NC output.

2.   LCD or LED indicate the zone ID the working state the voltage of live wire.

3.    High/low voltage switch manually, long-distance equipment auto switch function.

4.    RS 485 communication protocol offer long distance management solution.

5.    DC12V, NC/NO dry contact alarm output(Relay output), can work with other modern security products.

6.    Set up alarm delaying triggered time freely

7.   Spacious space is enough for 4-7Ah back up lead acid battery.

8.   Multi power supply function make the energizer working at all kind of poor power condition, 

   Mains AC110-240V, Battery or Solar panel with DC12V.

9.   Sealed metal casing would reduce the electromagnetic radiation effectively, preventing the invisible damage to our family health or other electrical equipment.

10. Remote control(wireless) makes the arming or disarming easily from any place.

Our products are warranted to be free from defects in materials or workmanship for 1 year from the date of purchase. Within this period, Manufacturer will, at its sole option, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided the customer shall be responsible for any transportation cost.

This warranty does not apply to: (i) cosmetic damage, such as scratches, nicks and dents; (ii) consumable parts, such as batteries, unless product damage has occurred due to a defect in materials or workmanship; (iii) damage caused by accident, abuse, misuse, water, flood, fire, or other acts of nature or external causes; (iv) damage caused by service performed by anyone who is not an authorized service provider of Manufacturer; (v) damage to a product that has been modified or altered without the written permission of Manufacturer; or (vi) damage to a product that has been connected to power cables that are not supplied by Manufacturer.In addition, Manufacturer  reserves the right to refuse warranty claims against products or services that are obtained and/or used in contravention of the laws of any country.

Repairs have a 90 day warranty. If the unit sent in is still under its original warranty, then the new warranty is 90 days or to the end of the original 1 year warranty, depending upon which is longer.