Water Quality Analyzer Chloramphenicol Rapid Test Strips

Nankai Biotech Chloramphenicol  Rapid Test  is a rapid, one step test for the qualitative (or quantitative) detection of Chloramphenicol in water sample at the sensitivity of 2 ppb.

SmarKIT Advantages:

1. 3-5 min reading results

2. Detection limits respond to EU and US FDA norms

3. Single test for every target sample

4. Neither professionals nor equipment required

5. Eyes interpretation or quantitative measurement,suitable for lab and field use

6. Room temperature storage

7. Non-toxic and harmless

1. INTENDED USE

The N.K.Biotech Chloramphenicol  Rapid Test is used to qualitative(or quantitative) detect Chloramphenicol  in water. The total assay time takes 5 min.

2. TEST PROCEDURE

1. Remove Rapid Test from sealed pouch.

2. Suck at least 3 drops of prepared sample, hold the dropper vertically and transfer 3 full drops(around 100μL) of solution to the specimen well (S) of the test device (See the illustration below), and then start the timer.

3. Wait for red bands to appear. The result should be read in approximately 3-5 minutes. Do not interpret results after 10 minutes.

3. READING RESULTS 

4. STORAGE AND STABILITY

Store at room temperature. The shelf life is 12 months.

We are an ISO & TUV certificated biotech company that have developing, manufacturing, marketing rapid test kits and traceability system building for food and feed for more than 10 years,

Our products have verified by international health authority as a confident screening method for argriclutre industry.

we now have following product lines available: 
1) Rapid test in feed and grains
2) Rapid test in seafood and fish
3) Rapid test in animal meat and urine
4) Rapid test in honey
5) Rapid test in milk
6) Rapid test in eggs & edible oil

1) Our Company  

2) Available Rapid Tests  

3) Our Storage 

4) Exhibition  

5) Certifications and Reputations

6) Third Party Validation Reports and Publications