Wood Debarking/peeling Machine With Direct Manucafure

Specifications

Wood peeling machine

Wood peeling machine mainly by the feeding mechanism, the feeding mechanism, cutter, transmission, chassis and other parts.

Wood peeling machine Application: suitable for cutting of the new softwood and hardwood for some peeling treatment can also be completed part of the frozen material, the dry wood of the peeling treatment.

1.Using four point tool, easy to use and low cost.

2, the cutter head by the control of hydraulic pressure regulator, advanced structure, reliable performance.

3, continuously variable feed sector, with good hard peeling peeling effect for the frozen material, bent wood, eucalyptus, oak, elm and other trees.

4,net stripping high, high productivity, small wood damage

Efficient rotor-type wood peeling machine

  Peeling wood logs, mainly logs, small diameter wood logs, etc., peeled, cut film, stripping more than 95% of net.

YD-8000 High-efficiency rotor wood peeling machine (slot wood peeling machine) is a new generation peeling wood products with innovative and efficient advantages, wood peeling machine rotor (slotted wood peeling machine), the working principle is the unique force generated by the rotor with peeling teeth, that make the wooden log not only cycling in the silo tank plate in circular motion condition, but also do wood turning motion segment and irregular beating around its own axis.

Wood peeling machine rotor (slotted wood peeling machine) to this section, during the non-stop friction, crash, crush of the teeth rotor and woods, wood segments, wood storage tank sections, the bark is separated quickly, reaching high peeling effect.

Advantages:

1. With open hopper, wood feeding and releasing separately from different places at the same time, that has overcome the shortcomings of segmented work in the existing roller peeling machine with power cut for feeding and releasing the material.

2. Impact of the rotor teeth for wood, not only make the wood segment do circular motion in the chassis, but also turn itself around, so it has high peeling efficiency even for hard peeling wood of eucalyptus species and poplar wood,

3. It has the good adaptability for the wood, it can peel different tree species, diameter, length and shapes because of the rotary motion and irregular beating, the concave section of the curved wood also can have a close touch,therefore, the net rate of bending wood stripping is much higher than the other roller type wood peeling machine.

4. Because of the huge housing is fixed, so it has the low energy consumption, low failure rate, small repair work, much lower vibration and noise than the roller peeling confidential, the machine ease install without the base installation, use conveniently.