TBC replacement Epoxy Fatty Acid Methyl Ester additives for polyvinyl chloride (pvc)

200kg iron drum,IBC drum,flexitank

Specifications

TBC replacement

Application:

Epoxy Fatty Acid Methyl Ester S-02, which has higher flash point and high epoxy value, mainly use for high-end PVC soft products, such as foaming PVC leather, garment leather electric ,wire,cable, etc.

Product Features:

1.High flash point: The flash point of Epoxy Fatty Acid Methyl Ester S-02 has reached 190 to 195 degrees, which is the best quality among the same products in China. The higher flash point, the less to evaporate, which can avoid the explosion and combustion in the foaming tank during the PVC production process.

2.High epoxy value :The higher the epoxy value ,the less the epoxy value will be reduced when meets high temperature .the effect of plasticizer will not be reduce , and can reduce the cost of PVC products with more substitution .

3. No odor: It has no odor, which guarantees that the finished products have no odor and there is not inoffensive odor in the workshop during rolling film and foaming production.

4. Environmental-protection: It is made of natural plant oil, which has the good environmental-protection and also meet the EU environmental standards.

5. With good compatibility, low vaporization and good stability to the light and heat, Epoxy Fatty Acid Methyl Ester S-02 could reduce the use quantity of stabilizer.

Products Index: