High capacity Blackboard chalk making machine /chalk machine

 1. Brief introduction of chalk making machine    

This machine is a new type of practical chalk-producing appliance. It can produce circle, square and Hexagon type write and coloured chalks. It has high efficiency and easy to operate, it can help save labors.

2. Advantages of chalk making machine 

1). Chalk making machine, the raw material is calclum carbonate, the chalks are widely used at shool.

2). According to your requirement, you can produce it in different colors! The color of equipments can be changed. 

3).The equipment is made of cast iron, the core of mould is made of ABS plastic. The rate of eligible product is 99%.

4). The chalk size and shape can be customized.

2. How to make chalk     

1). Mold evenly brush oil, brush back and forth with a wide brush, brush the new mold should be more oil.

2). The mold plate moving up and down a few times, the screw top and the bottom plate comes into contact.

3). Turn on the water, turn on the water with a movable foot switch pedal to pedal in the end, until the water in the water last. (First mold first feed, add water)

4). Addition, the quantitative good gypsum powder into the mixing bucket.

5. Mixing, stirring for 10-20 seconds to start the motor.

6). Put the pulp, put a good brush oil stirred to die bottom of the barrel, hit the switch to open the pulp slurry was stirred well into the mold until the stream last.

7). Calibrating with a plastic scraper to scrape the pulp mold hole, scrape out the remaining pulp mold mouth gelling.

8). A mold, a new mold die not too late. Chalk can feel a little hard to top 2-5 mm, 1 to 2 minutes over again ejection.

1.We always use standard export packing, carton box. But for our customer, Alpha Machine give a free Wooden Package to protect your machines.

2.You can choose express, by air, by train or by sea. Always we will give our best recommend based on our experience.

3. We cooperate with China best shipping company to get best price and fast delivery.

4. You will get full feedback when your machine is on the way.